PREMIER1 Replace the Circuit Board Instruction Manual
- June 6, 2024
- PREMIER1
Table of Contents
PREMIER1 Replace the Circuit Board Instruction Manual
IF YOUR ENERGIZER DOES NOT HAVE AN EXTERNAL 110V ADAPTER PORT
-
Using needle nose pliers, grasp the spade clip of the black lead from the transformer to circuit board. Pull to remove. Repeat for white lead.
Caution: Do not pull on the insulated portion of the wire, only the metal spades (doing so prevents damage to the wire). -
Remove old circuit board and insert new board. How? Lift back of board and pull away from power button— this will cause the button to pop loose.
-
Connect black lead to single spade terminal that’s at the bottom to blue capacitor. Connect white lead to double spade terminal that’s in the middle of capacitor.
-
Reconnect red and black leads.
IF YOUR ENERGIZER DOES HAVE AN EXTERNAL 110V ADAPTER PORT
-
Using needle nose pliers, grasp thespade clip of the black lead from the transformer to circuit board. Pull to remove. Repeat for white lead.
Caution: Do not pull on the insulated portion of the wire, only the metal spades (doing so prevents damage to the wire). -
Remove old circuit board and insert new board. How? Lift back of board and pull away from power button— this will cause the button to pop loose.
-
Connect black lead to single spade terminal that’s at the bottom to blue capacitor. Connect white lead to double spade terminal that’s in the middle of capacitor.
-
Reconnect red and black leads.
800-282-6631
premier1supplies.com
©Copyright 2020, Premier1Supplies. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>