NETGEAR E4K Next Generation 21700 Compact EDC Flashlight Instruction Manual

E4K Next Generation 21700 Compact EDC Flashlight
■ Powered by a 2170 0 Battery
■ Ultra High Performance
■ Patented Power Indicator

Operating Instructions

Battery Installation
Insert the battery(s) as illustrated and screw to tighten the tail cap.
Note : After the battery insertion, the power indicator beneath the switch will flash to indicate the battery voltage. Please refer to the “Power Indication’. section of this manual for more details.
Warnings:

1.  Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
2. Please use the battery magazine when using 2 x CR123 batteries to avoid battery rattling and to ensure stable contact.
3. CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
4.  When the power level is low, please stop using the product and recharge the battery as soon as possible to prevent damage to the battery.
5. When the product is kept in a backpack or left unused for a prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
6. DO NOT submerge the light into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference in air pressure inside and outside of the tube.
   On/Off
   On: When the light is off, press and hold the Power Button for approx. 1 second to turn it on.
   Off: When the light is on, short press the Power Button to turn it off.
   Brightness Levels
   When the light is off, keep holding the Power Button after turning on the flashlight to cycle through the following brightness levels: ULTRA LOW — LOW — MID — HIGH — TURBO. Release to select the desired brightness level. (This access has mode memory. When reactivated, the flashlight will automatically access the previous memorized brightness level.)
   Direct Access to ULTRALOW When the light is off, double press the Power Button to directly access ULTRALOW.
   Momentary Access to TURBO When the light is on, press and hold the Power Button to momentarily access TURBO. Release to return to the previous brightness level.
   Special Modes (STROBE / SOS / BEACON)
   

• When the light is on, triple press the Power Button to access the STROBE Mode.

• When the STROBE Mode is on, long-press the Power Button each time to cycle through the following special modes: SOS — BEACON — STROBE.

• When one of the special modes is on, short press the Power Button to exit special modes and turn off the light.
  User Mode Selection
  The E4K provides 2 user modes including Daily Mode and Tactical Mode for different users and situations.

• Daily Mode (Default Setting): When the light is off, triple press the Power Button to directly access TURBO.

• Tactical Mode: When the light is off, triple press the Power Button to directly access STROBE.

To select the desired user mode: 1. Ensure the light is turned off. 2. Loosen the tail cap. 3. Keep holding the Power Button while simultaneously tightening the tail cap. 4. Once the tail cap has been tightened, the LEDs will indicate a user-mode selected by flashing once for Daily Mode or flashing twice for Tactical Mode.
Power Indication
• When the battery is inserted, the power indicator beneath the switch will flash to show the battery voltage (±0.1V). For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent the corresponding remaining battery power levels:

Note: When using two CR123/RCR123 in series, the indicator will show the average voltage between the two batteries.
• When the light is off, short press the Power Button, and the power indicator will flash to indicate the remaining power:
1. Flashing three times indicates that the power is above 50%;
2. Flashing twice indicates that the power is below 50%;
3. Flashing once indicates that the power is below 100/0.
ATR (Advanced Temperature Regulation) The integrated ATR technology regulates the output of the E4K according to the working condition and ambient environment to maintain optimal performance.
Changing Batteries The batteries should be replaced when the output appears to be dim or the flashlight becomes unresponsive due to low power.
Maintenance Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicone-based lubricant.

Features

• Utilizes 4 x CREE XP-12 V6 LEDs with a max output of 4,400 lumens
• An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
• Maximum peak beam intensity of 11,100cd and maximum throw of 211 meters
• A highly efficient constant current circuit provides a stable output for up to 700 hours
• One side switch specialty designed for outdoor applications controls 5 brightness levels and 3 special modes
• STROBE Mode uses randomly changing frequencies for stronger dizzying effects
• A power indicator beneath the side switch indicates the remaining battery power (Patent No. ZL201220057767.4)
• The power indicator can display the battery voltage (±0.1V)
• NITECORE 21700 rechargeable Li-ion battery (NL2150HPR 5,000rnAh) included
• Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
• Electronic reverse polarity protection
• Optical lenses with double-sided scratch-resistant coating
• Constructed from aero grade aluminum alloy
• HA III military grade hard-anodized finish
• Waterproof in accordance with IP68 (2 meters submersible)
• Impact-resistant to 1 meter
• Tail stand capability

Specifications

  Accessories

NITECORE 21700 Rechargeable Li-ion Battery (NL2150HPR 5,000mAh), USB-C Charging Cable, Clip, Lanyard, Spare 0-ring, Holster, CR123 Battery Magazine

Battery Options

| Type| Nominal Voltage| Compatibility
---|---|---|---
NITECORE NL2150HPR 5,000mAh| 21700| 3.6V| Y (Recommended)
21700 Rechargeable Li-ion Battery
(Output Over 15A)| 21700| 3.6V/3.7V| Y (Recommended)
Primary Lithium Battery| CR123| 3V| Y (Compatible)
Rechargeable Li-ion Battery| RCR123| 3.6V/3.7V| Y (Compatible)
21700 Rechargeable Li-ion Battery
(Output Below 15A)| 21700| 3.6V/3.7V| N (Incompatible)
18650 Rechargeable Li-ion Battery| 18650| 3.6V/3.7V| N (Incompatible)

Technical Data

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

• The runtime for TURBO mode is tested without the temperature regulation.
• TURBO Availability: The TURBO level is only accessible when using a 21700 rechargeable Li-ion battery with an output over 15A. It is inaccessible when using CR123/RCR123 batteries.

Battery Installation

Warranty Service

All NITECORER products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORER products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
3. the product(s) is/are damaged due to battery leakage. For the latest information on NITECORER products and services, please contact a local NITECORER distributor or send an email to [email protected]
All images, text, and statements specified herein in this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the right to interpret and amend the content of this document at any time without prior notice.

SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: [email protected].
Web: www.nitecore.com 
Address:
Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou, 510623, Guangdong, China
CE Made in China
Please find us on Facebook: NITECORE Flashlight Thanks for purchasing NITECORE!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>