LogTag LTI-WiFi Interface Cradle User Guide
- June 6, 2024
- LogTag
Table of Contents
LogTag LTI-WiFi Interface Cradle
What’s Included
Please check you have each of the items shown below before continuing with setting up your LTI-WiFi.
LTI-WiFi
USB Cable
Note: The LTI-WiFi cradle can be used with any standard LogTag loggers with 3 silver contact pins
Downloading the Connection Wizard
Connect your LTI-WiFi to your computer via the USB cable. The USB socket on the interface is located at the back of the interface cradle.
Your LTI-WiFi requires you to connect it to your WiFi Network. To do that, we have an easy tool for you to use called the LogTag Online Connection Wizard.
Note: If you have the latest LogTag Analyzer (version 3.1.6 onwards), you
can just run the wizard instead without having to download it by opening
LogTag Analyzer then clicking ‘Connection Wizard’ from the ‘LogTag Online’
menu.
Alternatively, you can download the LogTag Online Connection Wizard here.
Please click the link below: https://logtagrecorders.com/wp-
content/uploads/connectionwizard.exe
If you have issues with the link above, you can download the .zip version instead and ensure you unzip the file before running it via the link below: https://logtagrecorders.com/wp-content/uploads/connectionwizard.zip
Warning: Please ensure no other LogTag software is currently running on
your computer before running the
Wizard software.
Running the Connection Wizard
Open LogTag Analyzer and select ‘Connection Wizard’ from the ‘LogTag Online’
menu.
PlPlease ensurease ensure te therhere is e is interinternet connectnet
connection on yourion on your computer prcomputer prior to starior to starting
tting this prhis processocess..
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
You will be asked to sign in to your LogTag Online account. If you do not have an account, click the link below or alternatively, open your browser, type the following link into the address bar and follow the on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
Note: If you ‘Skip’ this step, you will need to manually register the
device on LogTag Online or repeat the LogTag Online Connection Wizard.
Click ‘Sign In’ after you have entered your login details to continue setting
up WiFi on your LTI-WiFi.
You hou have now crave now created your account aneated your account and is nowd is now rready to set upeady to set up connection of your L connection of your LTI-WiFi to theTI-WiFi to the WiFi nWiFi network.etwork.
The Wizard will now scan for any connected LogTag devices.
If the scan doesn’t find any devices, double-check the device is plugged in to
your computer with the USB cable provided and click “Scan Again”.
As soon as a device has been identified, it will appear in the table (left)
and automatically register that device to your LogTag Online account. 
Connecting to your WiFi Network
The Status will turn green with the text “Registered” once complete.
If one or morIf one or more device(s) are device(s) are identified and re identified and registered the screen screen automatically switches automatically switches to the next scratches to the next screen
-
Network settings are automatically populated from PC settings by default, if it can be discovered. Alternatively, click the Network Name arrow to see nearby Wireless Networks options and select your WiFi Network from the list and type the password for the network. Remember that passwords are
case-sensitive.
Note: If you need to make any Advanced Network setting changes, select the ‘Advanced Settings’ box. -
Once you have provided the chosen network and password, or Advanced Network settings, click “Next”.
Note: Some WiFi Networks won’t appear in this list for security purposes. If you are aware that your network is one of these, you can manually type the name of your network (SSID) in the Network Name field instead of clicking the menu arrow.
The device is now being configured with the WiFi details you provided in the
previous screen, which typically takes 10 seconds.
The Connection Wizard is now checking that the LTI-WIFI can connect to your
WiFi network and to LogTag Online. The red network LED blinks while the
interface establishes a connection with the wireless network.
Once the Wizard displays “Config Complete. Check Device for status”, click
“Close” to close the Connection Wizard or click ‘LogTag Online Sign In page’
link to take you to the LogTag Online website.
Or click “Again” if you want to run the Wizard to repeat the configuration
process from the beginning.
Note : The network LED on the LTI-WiFi turns solid blue after 15-20
seconds once connection is successful. If the red network LED is flashing,
please check
you have entered the WiFi credentials correctly.
If you are continuing to encounter networking or logger communications issues,
please refer to the troubleshooting section by opening your browser and typing
the below URL in the address bar:
help.logtagrecorders.com/WiFi-
Interface/Topics/Interfaces/Troubleshooting.htm
LogTag Online
LogTag Online is a secure online service that stores the data recorded from
your logger against your account.
Signing in to your LogTag Online Account
Click this link or open your browser and navigate to:
https://logtagonline.com
- Type your Email and Password
- Then click “Sign In”.
- Upon signing in, you will see the Dashboard.
Registering a new device & Downloading Results
Connect your LTI-WiFi to your computer via the USB cable. The USB socket on
the interface is located at the back of the interface cradle.
PleasePlease ensur ensure e the Lthe LTI-WiFi is connTI-WiFi is connected to
the WiFiected to the WiFi network and thenetwork and the cloud server cloud
server..
The blue ‘network’ LED is permanently on to indicate it is connected to LogTag
Online cloud server.
PlPlease ensurease ensure your logge your logger has starer has started prior
to ted prior to dockingdocking it in toit in to the L the LTI-WiFi inTI-WiFi
interterfaceface..
Simply dock a logger with 3 silver contact pins into the LTI-WiFi interface
cradle.
The green ‘Ready’ LED is permanently on to indicate it is ready to accept a logger.
The red ‘Busy/Error’ LED is permanently on while the data is being downloaded from the logger.
The green ‘Ready’ LED flashes to indicate the download was successful.
After you have docked a logger into LTI-WiFi, it will automatically register
the logger in LogTag Online and show in the Recently Registered Devices
section of the dashboard. Data is also downloaded from the logger and show up
as LTD files in the ‘Recently Uploaded Files’ section on the main dashboard in
LogTag Online or as saved files in LogTag Drive.
Note: If your logger is attached to a location, the data will be added to
the location, and no data file will appear in the LogTag Drive.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>