HSYK J97 Wireless Earphone User Manual
- June 6, 2024
- HSYK
Table of Contents
HSYK J97 Wireless Earphone
Self use
After leaving the factory, the Bluetooth headset is fully tested after
startup, so the battery is not fully charged. It is recommended that you first
fully charge the Bluetooth headset with a Sv-la charger or an electric sb.
After the first use of the Bluetooth headset, all the power is used up and
then fully charged, so that the service life is longer.
Note: do not use fast charging to avoid damage to earphone battery.
Introduction to headset functions
Poweron:
When the machine is out of the warehouse,the white light is inside for 3
times, and thenthe white and green lights flashalternatelyto enter the pairing
state, and the prompttoneindicates “the machine is started and
pairedsuccessfully”.
Shutdown:
After charging and shutting down, the green light is on for a long time, press
and hold the MF keyfor 5 seconds, and the green light flashes 3times, and the
prompttone “shutdown”
Pair:
After leaving the warehouse, the white light flashes three times, the white
and green lights of the main and auxiliary ears flash alternately, and the
white and green lights of the 1main ear flash alternately, and the auxiliary
ears turn off the lights and enterthe matching state.
Pairing connection:
After leaving the warehouse, the mortarlight flashes3 times, the white and
green lights of the main and auxiliary ears flashalternately, and the left and
rightearsenterthe pairing.After pairing, the white and green lights of the
main earflash alternately, and the auxiliary ear light is off. Enterthepairing
connectionstate with the mobile phone. Turn on the Bluetoothofthe mobile phone
and click the Bluetooth pairing device name to pair.Afterthe pairing is
successful, theprompt will be prompted.
Voice,” Bluetooth connected”
Letgo/stop:
During playing, press M FB key for a short time to pause the music
Disconnect:
When connected, turn off the Bluetooth or Bluetooth headset of the mobile
phone, and the prompt tone is “Bluetooth is disconnected”. The white and green
light on the main ear flashes, and the light on the auxiliary ear goes off.
Automatic loopback:
When the machine is turned on within the connection range, the Bluetooth
device will automatically connect with the paired bluetooth device, and the
“Bluetooth isconnected”willsound.
Answerthe phone:
When calling, press MFB key to answer the call.
Hangup:
In a call or charging, press the M FB key briefly to hang up the phone.
Call number:
When calling, the headset will automatically report the number: voice prompt,
incoming call “1 ……….
Reject calls:
When calling, press and hold the M FB key for about 2
Low power shutdown:
When the battery voltage is lower than the battery voltage, the headset will
turn off automatically
Volume up and down:
Double click the leftearMFB keyto reduce the volume, and double click the
right MFB key to increase the volume.
Up and down:
Click the MFB key on the left ear to achieve the previous song, and triple
click the MFB key of the right ear to realize the next song
Headphone compartment charging:
Put the earphone into the bin for charging, and turn off the light after the
earphone is full of green light.
Charging of charging bin
Plug in the SV power supply to charge the bin, and the display screen shows
the power.
Notes:
When charging the headset or compartment, please use a charger with no more
than SlA output. Do not use fast charging to avoid damage to earphone battery.
Before charging, please check whether the charger model is applicable. The
headset will discharge automatically when it is in use. It is recommended to
charge the headset once a month. Do not throw the headset into the fire or
water.
Disconnect the phone from the headset:
To disconnect the phone from the headset, turn off the headset in any of the
following ways: disconnect the headset from the phone using the Bl uetooth
menu; move the headset away from the phone 10 meters (about 30 feet)
Maintenance
Put all accessories out of the reach of children. Rainwater and other liquids will erode the circuit of the headset. If the headset has been wet please dry the headsetthoroug hly before use. Do not disassemble, modify or squeeze the headset without permission, otherwise it may cause the headset to malfunction or burn.
In accordance with the relevant provisions of the relevant laws and regulations of the people’s Republic of China, the people’s Republic of China on the protection of consumers’ rights and interests and other relevant laws and regulations of the state, we protect the repair and replacement of the sellers and producers of consumer goods. For the relevant goods, earnestly fulfill the responsibility and obligation of repair, replacement and return
- The warranty service is only limited to the nonhumanmade damage caused by the quality of the product under normal use.
- Within 30 days from the date of purchase, if there is any performance failure, annual artificial damage), the product will be returned and replaced free of charge.
- The productsubjectwill providewarrantywithin one year from the date of purchase.
- The company still needs to repairtheproductbeyondthewarranty date or beyond the warranty period, We charge for maintenance at our discretion.
Note that when:
you tear up or lose the warranty card, you will lose the chance of warranty.
Our company has the right of final explanation
Product quality warranty card
Product model|
---|---
Commodity origin|
User name|
Sales location|
Date of sale|
Name of seller|
Sales contact number|
Maintenance records|
- This warranty card must be provided when receiving service. Please keep it properly!
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.