Gydom ID207 Smart Watch User Manual
- June 6, 2024
- Gydom
Table of Contents
Gydom ID207 Smart Watch
Product overview
Physical button operation
Short press
- To return.
- To wake the screen when it is off.
Long press
- To turn on the watch.
- For Ss while charging to reset apps. (Data will not be cleared)
Turning on/off
Turning on
Whilst the watch is off, it automatically turns on when you put it on charge.
Note: Charge the watch to activate it before first use. The original power adapter must be used for charging. Long press the button to turn on the watch.
Turning off
To turn off the watch: go to Settings -> Turning off rnenu.
App downloads and pairing
App downloads
Download and install the “VeryFit” app on the App Store, Google Play or by
scanning the QR code below.
Pairing
Turn on VeryFit app -> Activate Bluetooth connection on your phone ->
Search on the app for the device to pair with (or scan the QR code on the
device)-> Finish binding on the app (or on the device).
Screen operation
Swipe up/down
- To toggle through menu.
- To view long text/details.
Swipe left/right
To toggle through menu.
Tap the screen
- To enter the menu.
- To operate according to the prompts.
Tap and hold on the screen
To switch between watch faces.
Features
ID207 has features such as SATM water resistance, ultra-long battery life, full-screen touch control, low latency, 14 workout modes and multiple cloud watch faces. It supports heart rate monitoring and stress detection throughout the day, blood oxygen detection and sleep monitoring, etc. For operating instructions and FAQs on these features, please turn on the app and go to “User Guide” section.
Care and maintenance
Three suggestions for use and maintenance:
- Keep the product clean;
- Keep the product dry;
- Do not wear the product too tight;
- Do not use household cleansers when cleaning the product. Use soap-free cleansers instead.
- For stubborn stains, it is recommended to remove by scrubbing with alcohol.
Safety instructions
- Do not place the product and its accessories at extreme temperatures, otherwise it rnay cause hazards such as product failure, fire or explosion.
- Protect the product from strong impacts or jolts, so as not to darnage the product and its accessories, thus avoiding product failures.
- Do not disassemble or modify the product and its accessories by yourself. Contact us for after-sales service when the product fails.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>