Govee H1162 Sync Box II User Manual
- June 6, 2024
- Govee
Table of Contents
Safety Instructions
Read and follow all the safety instructions:
- This device is for indoor use only.
- Avoid dropping the device from high places.
- Do not significantly modify the device.
- Do not leave children unattended with the device.
- Only use the attached power cable to charge this device.
- This device is not waterproof. Avoid exposing it to splashing, water drops, or any high-humidity environment.
- If you don’t plan to use this device in the short term, long press for 3 seconds to Power-Off Mode.
- If you have not used this device for half a year, please recharge it before using it again in order to protect the battery.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Be aware discharged batteries may cause fire or smoke, tape the terminals to insulate them.
Introduction
Thanks for choosing Govee Sync. This portable box contains one button which can sync any music type via Bluetooth to other Govee devices within a range of 10 meters (32.8 ft), greatly enhancing the harmony between the lighting effects and your favorite songs.
What You Get
Sync Box 1
Type-C Cable 1
User Manual 1
Service Card 1
At a Glance
| Button | Function |
|---|---|
| Short press | Stand-by Mode = On |
| Long press for 3 seconds | Power-Off Mode = On |
| Short press for 5 times within 3 seconds | Reset |
Pairing your Device with Govee Home App
https://www.govee.com/apps/qrcode
Gove Home App
For FAQs and more information, please visit;
www.govee.com
Pairing Instructions
- Download Movie Home App from the App Store (i0S) or Google Play (Android).
- Turn on Bluetooth on your smartphone.
- Open Gove Home App, tap the “+” icon in the top right corner, and search for “H1162”. 41)
- Tap the device icon and follow the on-screen instructions to complete the pairing.
Specifications
| Connected Sub-devices | ≤5 |
|---|---|
| Control Range | 10m/32.8ft |
| Voltage | 5V DC |
| Control Method | Gove Home App |
Note: Sub-devices connected to Govee Sync cannot be individually controlled by their remote, control box, Gove Home App, and any third-party Voice Assistants. If you wish to control the sub-device separately, disconnect it from Govee Sync or turn off Group Control on the app.
Troubleshooting
1. Cannot connect to Gove Home App.
• Check if the device is powered on.
• Check if Bluetooth on the smartphone is enabled, or try connecting with
another smartphone.
• When connecting for the first time, ensure the smartphone is near the
device.
• If a connection error still exists, please delete the connected device from
“My Device” on the app.
• Reconnect to Gove Home App by following the previously provided
instructions.
2.No response to any press during usage. Use a needle or a similar object to press into the hole on the bottom of the device to reset it.
Customer Service
Warranty: 12-Month Limited Warranty 43
Support: Lifetime Technical Support
Email: support@govee.com
****Official Website:www.govee.com
@Govee
@govee_officia
@govee.official
@Goveeofficial
@Govee.smarthome
User Manual
Model: H1162 Govee Sync Box I I
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.