JASCO WFD7102 Wi-Fi Smart LED Bulb User Guide
- June 6, 2024
- JASCO
Table of Contents
JASCO WFD7102 Wi-Fi Smart LED Bulb
Download the app
Scan the QR code above or search UltraPro on the Apple App Store or on Google Play.
|
---|---
Set up account
- Create an account in the UltraPro app
- Add devices, control the smart bulb from anywhere and create schedules
Install the smart device
Turn OFF power at the switch before installation
-
Create an account in the UltraPro app
-
Power switch for the lamp or light fixture must be ON
Voice control
Compatible with Amazon Alexa and Google Assistant
Follow the steps in the Amazon Alexa or Google Assistant app to connect the UltraPro app or select “Support” in the UltraPro app.
Instructions made easy
Read instructions or watch easy-to-follow video. Scan code or visit
byjasco.com/51447I.
For deals, to register your purchase and to tell us how we’re doing, simply
scan the code or visit byjasco.com/deals.
For a full line of Wi-Fi smart devices, search “UltraPro Wi-Fi” on amazon.com
or visit byjasco.com/ultrapro.
Like our product?
Leave a review on amazon.com.
Having problems?
Let us know how we can help. Call
1-800-654-8483 between 7 AM-8PM. M-F.
Central Time.
- NOT FOR EMERGENCY LIGHTING
- RISK OF ELECTRIC SHOCK
- RISK OF FIRE
- RISK OF BURNS
- DO NOT USE WHERE DIRECTLY EXPOSED TO WATER
- DO NOT USE WITH STANDARD DIMMERS
- NOT FOR USE IN TOTALLY ENCLOSED LUMINARIES
- DO NOT USE WITH MEDICAL AND LIFE-SUPPORT INSTRUMENTS
08/04/2021 v1
FCC Declaration of Conformity is available on the support page in the UltraPro
app.
Google and Google Play are trademarks of Google LLC.
App store is a service mark of Apple Inc.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates.
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City,
OK 73114.
This Jasco product comes with a 5-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.
This device complies with Part 15 of the FCC Rules / Industry Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be to try to correct the interference by one
or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver to which the
receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.