Hangzhou Meari Technology FLIGHT 4T Floodlight Camera User Guide
- June 6, 2024
- Hangzhou Meari Technology
Table of Contents
Flight 4T
ORIGINALITY DESIGN SMART AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Consult the checklist below for all components
Description
| Power | AC 100-240V |
|---|---|
| Status light | • Solid red light on: the camera network is abnormal |
• Blinking red light: awaiting WiFi connection
• Solid blue light on: camera running correctly
• Blinking blue light: currently connecting
Microphone| Captures sounds for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold the ‘RESET’ for S seconds to reset the device(if you
have modified settings, they will return to factory defaults)
Light| Turn the light on/off manually or automatically
Installation
How it all fits together.
WARNING
- AC100-240V Power connection.
- Disconnect power at the fuse or circuit breaker before installing.
Step 1
Shut the power off at the breaker. If you do not know where your breaker is or
how to turn off the power, consult with a licensed electrician.
Step 2
Fix the bracket on the wall.
Step 3
Unscrew the nuts at both ends of the waterproof terminal and connect the
corresponding live, neutral, and ground wires respectively.
Note: Remove the outermost wrapping layer, the reserved colored power cords do not exceed 17mm, and the peeled part of each colored power cord does not exceed 5mm.
Step 4
After the power cords are connected, tighten the nuts at both ends of the
terminal in order to fix the power cords.
Step 5
Hang Flight Cam. Use the provided hook to hang Flight Cam from the bracket
while connecting the wires.
Hook one end of the provided hook into one of the mounting holes on your Bracket.
Fix the Flight Cam to the bracket
- After fixing the camera on the wall, adjust the camera angle according to the arrow directions.
- Tighten the no.1/2/3/4/S screws respectively.
NOTE: Restore power at the breaker after installing Flight Cam.
Connection
Download
Smart life is available for both iOS and Android OS. Search the name
‘SmartLife’in App Store or Google Play, or scan the QR-Code to download the
App.
Support
Add Camera
Log in the Smart life, select “Add Camera”, and add the smart camera to the
APP according to the screen tips(Make the smart camera close to the router
when configuring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
Function
Lighting control
You can turn the light on or off with time setting or PIR.
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Daytime & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>