Hangzhou Meari Technology Bullet 4S IP Camera User Guide
- June 6, 2024
- Hangzhou Meari Technology
Table of Contents
Bullet 4S
ORIGINALITY DESIGN SMART AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Consult the checklist below for all components.
Description
| Power | DC12V±10% |
|---|---|
| Status light |
- Red light solids on the camera or network are abnormal
- Blinking red light: awaiting WiFi connection (faster blinking)
- Blue light solids on camera running correctly
- Blinking blue light: currently connecting
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have modified
settings, they will return to factory defaults)
Install
- ****Fix the Camera to the wall with screws
- Adjust camera angle to a correct view (as shown in the picture)
Connect
Download
SmartLife is available for both iOS and Android OS. Search the name ‘Smart
Life’, in App Store or Google Play, or scan the QR-Code to download the App.
Support
http://e.tuya.com/smartlife
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is connected to the WiFi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi.
Registration process
Step 1
Open the Smart Life App, click ‘Register”, read the “Privacy Policy” and click
“Agree” .
Step 2
Input a legal and valid Mobile number or Email address and click “Continue”.
Input Verification Code, then log in to the app.
QR Code Configuration
-
Open the Smart Life App, click “Create a family”, and you can customize the Family name and related settings.
-
Continue to click “Security & Sensor” » “Smart Camera”,and then choose”Add Device” or “+”,ready to add camera.
-
In “Add Device” this interface, continue to click “next step”, and then you should input your WiFi’s passwords.
Note:
• The camera only supports a 2.4GHz WiFi network.
• The number of bits in the SSID and passwords of the router should not exceed 24 digits. -
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out “dong dong dong”. And you can complete the configuration in about 30s.
-
When connecting, you should make sure your router, mobile, and camera are as close as possible. When the camera is added successfully, click you could also DIY the camera’s name.
Settings
In the “Smart Camera” interface,click you can set the camera common functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.