Hangzhou Meari Technology Mini 12S Fixed Dome Camera User Guide
- June 6, 2024
- Hangzhou Meari Technology
Table of Contents
Mini 12S
ORIGINALITY DESIGN AND BEAUTIFUL
QUICK GUIDE
What’s in the box
Consult the checklist below for all components.
Description
Power | DC5V±10% |
---|---|
Status light | • Red light solids on: network is abnormal |
• Blinking red light: wait for network connection (slowly blinking) connecting
the network (quickly blinking)
• Solid blue light on: the camera is working correctly
Microphone| Captures sounds for your video
SD card slot| Supports local SD Card storage (Max.128GB)
Reset| Press and hold the ‘RESET’ for 5 seconds with pin to reset the
device(Camera will return to factory defaults)
Install
-
Stick the adhesive tape in the middle of camera bottom
-
Put the camera on the clean plane
Connect
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the
App.
Support
https://itunes.apple.com/app/id1294635090?mt=8
|
https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
---|---
Download App (iOS &android)
Add camera
Log in the CloudEdge, select “Add Camera’, and add the smart camera to the App
according to the screen tips(Make the smart camera close to the router when
configuring).
NOTE: If you need to re-select the WiFi network, please press and hold
the “RESET” button for 5 seconds, the device will restart, and the indicator
will be flashing red.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to
the router, and if not, it is recommended to reset the device and add it
again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened; Message notification and authority
confirmation in the mobile phone system have been opened.
Functions
Video flip
Flip your video stream vertically anytime for maximum flexibility.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high capacity SD card storage.
Daytime & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fovowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>