Hangzhou Meari Technology Baby 1M Baby Monitor User Guide
- June 6, 2024
- Hangzhou Meari Technology
Table of Contents
Hangzhou Meari Technology Baby 1M Baby Monitor
User Guide
What’s in the box
Please consult this checklist for all parts.
Description
Micro USB | DC 5V/1A |
---|---|
Microphone | Capture sound for your video |
SD card slot | Support local SD Card storage (Max.128G) |
Status light |
- The solid red light on the network is malfunctional
- Blinking red light: wait for network connection (fast blinking)
- The solid blue light on the camera is working correctly
Call/Pairing| Press to make a call; long press to pair
Reset| Press and hold for 5 seconds with a pin to reset the camera (if you
have modified settings, they will return to factory defaults)
Micro USB | DC 5V/1A |
---|---|
Status light of charging |
- Orange light: Charging
- Greenlight: Fully charged
Status light of using|
- Yellow light: The display is on
- No light: The display is off
Microphone| Capture sound for your video
Antenna| Adjust the angle to get better signals
ON/OFF button| Long press 5 seconds to turn on and turn off the display
Zoom in/out| Zoom the image in lx, 2X or 4X
Menu| On the homepage, press to enter the menu interface;
On the homepage, long press to enter the setting interface
Directions| Control the rotation directions; select the menu items
OK| Confirm
Call| Make a call after pressing the button
SD card slot| Support local SD Card storage (Max.128G)
Reset| Press with a pin to reset the display
Back| Press to back up;
On homepage, long press to stop playing music
Installation
-
Use the included mounting bracket to fix the camera to a clean surface.
-
Or, install the camera on a flat surface.
Connection
Connect the camera to the display
Power on the camera and the display, and then the camera will connect to the
display automatically. The connection is distance limited, so make the
distance between the camera and the display is no more than 200m.
-
Disconnect the camera to the display:
1. Press the Menu button on the display screen and select > Camera Management.
2. Long press the OK button on the display screen to release the binding.
-
Reconnect the camera to the display:
1. Press the Menu button on the display screen and select > Camera Management.
2. Long press the camera pairing button until you hear the prompt tone.
3. Press the OK button on the display screen to start pairing.
Connect the camera to the App
The camera can be connected both to the display and the App. Generally, it is
connected to the display by default. Follow the steps below to connect the
camera to the App:
- Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.
- Download the corresponding app on your phone. Register a new account to log in or log indirectly.
- Reset the camera using a pin until the status light is red in fast blinking. (You have to connect the camera to the App within 2 minutes; otherwise, you have to reset the camera again.)
- Follow the step instructions on your smartphone to add the display, and scan the QR code with your camera.
Connection
Download
SmartLife or Tuya Smart is available for both iOS and Android OS. Search the
name ‘SmartLife’,’Tuya Smart’ in App Store or Google Play, or scan the QR-Code
to download the App. You can select the App according to your needs.
Support
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is
connected to the WiFi network. Please set the parameters of the router before
connecting the WiFi network, and record the SSID and password of your WiFi.
Usage
Rotate the camera
You can adjust the monitoring angle for better vision. Press the Menu button
on the display screen, select < and press OK to enter rotation controlling
interface. Press direction buttons to rotate the camera horizontally and
vertically, for a better vision..
Photo & Video
- Take a photo: You can take a photo when you want to capture an interesting scene of your baby. Press the Menu button on the display screen, select and press OK to take a photo.
- Record a video: You can record a video when you want to capture a meaningful time of your baby. s) Press the Menu button on the display screen, select and press OK to record a video.
- View the taken photos and recorded videos:
1. Press the Menu button on the display screen, select , and press OK to enter the interface.
2. Select the camera and date, select the photo or video you want to view and press OK to enter preview mode. - For a video, press OK to play or pause in the preview mode.
- Press the backup button to quit preview or return to the main menu.
Play music
You can play music to soothe your baby when the baby is crying or sleeping.
There is various soft music to select from.
Press the Menu button on the display screen, select , and press OK to enter
the music interface. You can select different music, change the music cycle
mode, or adjust the music volume.
Feeding reminder
Remind yourself to feed your baby, when you are too busy, or when you want to
give your baby a regular diet.
- Press the Menu button on the display screen, and select > Feeding reminder.
- Press UP and DOWN direction buttons to select between 4-time options, and press OK to start the time setting.
- When start to set up one feeding time, press LEFT and RIGHT direction buttons to change options between hour, minute, second, and on/off; and press UP and DOWN direction buttons to change values and select on or off.
- Press OK to save settings.
- Select on or off to open or close feeding reminders. You can set up to 4 feeding times one day. And when the set time is up, a feeding alarm will appear on the display screen.
Humiture detection
You can real-time monitor the temperature and humidity of your baby room. When
the temperature and humidity are out of range, you can get the alarms
immediately, and then take measures.
- Press the Menu button on the display screen, and select > Humiture detection.
- Press UP and DOWN direction buttons to select options between temperature range, humidity range, and out of range reminder, and press OK to start setting.
- When start to set up one option, press the LEFT and RIGHT direction buttons to change options, and press UP and DOWN direction buttons to change values and units.
- Press OK to save settings.
- In the Out of range reminder option, select to turn on or off the alarm when the temperature and humidity are out of range.
Smart care
You can turn on functions of motion detection, noise detection, and cry
detection so that you can know the baby’s status immediately, no matter you
are sleeping, working, cooking, and so on.
- Press the Menu button on the display screen, and select > Smart care.
- Press UP and DOWN direction buttons to select options between motion detection, noise detection, cry detection, and alarm volume, and press OK to start setting.
- When starting to set up one detection mode, press the LEFT and RIGHT direction buttons to change options, and press the UP and DOWN direction buttons to adjust the sensitivity.
- You can select different sensitivity according to needs. Low is low sensitivity, and high is high sensitivity. 4. When setting up the alarm volume, press the LEFT and RIGHT direction buttons to adjust. 5. Press OK to save settings. 6. There will be an alarm when the set detection is triggered, press OK to stop the alarm.
General setting
-
Set up brightness:
1. Press the Menu button on the display screen, select and press OK to enter the interface.
2. Press the UP and DOWN direction buttons to adjust brightness. -
Set up time:
1. Press the Menu button on the display screen and select > Time setting.
2. Press direction buttons to change the date, time, and time displaying mode. -
Set up language:
1. Press the Menu button on the display screen and select > Language.
2. Select the language you need. -
Set up sleep mode: You can set up sleep mode to increase standby time.
1. Press the Menu button on the display screen, and select > Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes, or off. -
Turn on and off the status indicator. If you turn on the status indicator, you can get the working status of the camera. You can also turn off the status indicator if you think it will affect your baby’s sleep.
-
SD card:
1. Press the Menu button on the display screen, and select > SD card management. Then you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that the important data is backed up. -
Upgrade:
Make sure your camera is connected to a 2.4 GHz Wi-Fi. You can upgrade your camera when the upgraded alarm appears. Or Press the Menu button on the display screen, and select > Device information to check whether there is an upgrade. -
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the display screen. Please charge the display as soon as possible.
FAQ
Q: The display cannot be previewed properly?
A: Check whether the display has connected to the camera. If not, pair the
camera and the display firstly.
Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button
for 3 seconds and follow the step instructions of the display. (To enter the
pairing interface of the display, press the Menu button on the display screen,
and select > Camera Management.)
0: What if the display screen is stuck and it doesn’t work while pressing any
buttons? A: Press the reset button of your display with a pin, and then long-
press the power button of your display to restart it.
Q: Why the camera or the display cannot identify the SD card?
A: Confirm whether the SD card is normally available and the format is FAT32.
Q: Why I can’t get the notifications with my cell phone App when I connect the
camera to the display?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with a good
vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
The camera can detect movement, and then the camera will send you to push
notifications and app alerts.
Crying detection
The camera can detect the crying of your baby, and the camera will send you to
push notifications and app alerts.
Temperature & humidity detection
The camera can detect the temperature and humidity of the environment, and the
camera will send you to push notifications and app alerts.
Record Support 24H continuous recording with high capacity SD storage or Cloud
storage.
Daytime & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
FCC Statement:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the tiger’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>