onn 100074475 Slim Wireless Mouse With Bluetooth Wireless Technology User Guide

: June 6, 2024
: Onn

 **Slim Wireless Mouse**
**With Bluetooth® Wireless Technology**

Model: 100074475

PRODUCT GUIDE

Federal Communication Commission

**

Interference Statement**

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Before Use

Notes:

All parts have to be unpacked and the packaging material has to be removed completely. Before use, verify the package contents are complete and undamaged.

BATTERY WARNING STATEMENT

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (ni-cad, ni-mh, etc) batteries

System Requirements

Windows 7/8/10/11 or newer version, Mac OS 10.5 or newer version and Chrome OS
Available USB port or Bluetooth® on your laptop or computer

What’s in the Box

1 Wireless Mouse
1 USB nano receiver
1 AA battery

Specification

3 clickable buttons with 1600 DPI sensitivity
Connect to up to 3 devices simultaneously with Bluetooth® wireless technology or a USB nano receiver (stores in battery compartment when not in use)
USB plug and play
Scroll wheel
On/off switch
Easy switch for swithcing connection: 2.4Ghz/Bluetooth® 1/Bluetooth® 2
Windows, MacOS, ChromeOS, Android, iOS compatible
94 in L x 2.39 in W x 1.27 in H (10 cm x 6 cm x 3.2 cm)

Features

Left button
Right button
Scroll wheel
LED indicator
USB nano receiver
Connect button
Battery cover
Easy switch
ON / OFF switch

Switch Connection Channel

This mouse can connect with up to 3 different computers
Use “Easy switch” to change connection channels between
USB nano receiver and 2 other Bluetooth channels

USB nano receiver

Bluetooth 1

Bluetooth 2

Switch Devices

You can set
USB nano receiver ( ) on computer A
Bluetooth 1 ( ) on computer B
Bluetoooth 2 ( ) on computer C
then use “Easy switch” to switch connection between these 3 computers

Connect button

Press and hold this button to set the mouse in Bluetooth pairing mode,
also for reconnect to a paired device

Installing Battery

Insert the battery with the correct position according to the instruction labeled on the mouse

Connection Setup

Connect via USB nano receiver

It is plug and play for USB nano receiver,
make sure to turn on power and set
connection channel on USB nano receiver ( )
then just plug USB receiver into an available
USB A port on your computer and start
surfing onn.

Connect via Bluetooth in Windows

Turn on your mouse and set it on either Bluetooth 1 ( ) or Bluetooth 2 ( )
Click on “Start” (bottom left corner on your screen)
Go to Settings
-> Device -> Bluetooth & other devices -> Turn on Bluetooth
-> Add Bluetooth or other device -> Add a device (Bluetooth)

Press and HOLD

“Connect” button to set mouse in pairing mode (LED will start flashing) Click on “BT5.1 Mouse or onn. Mouse” in the list on your computer to setup pairing, LED will stop flashing and light up for 3 seconds when it is completed

Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630

We ‘d love to hear from you. Scan with your smartphone camera and let us know what you think.

Connect via Bluetooth in Mac

Turn on your mouse and set it on either Bluetooth 1 ( ) or Bluetooth 2 ( )
Click on “Apple menu” (top left corner of your screen)
Go to System Preferences
-> Bluetooth
-> Turn Bluetooth on to set up Bluetooth device

Follow same steps as Connect via Bluetooth in Windows to set
mouse and keyboard in pairing mode and complete Bluetooth pairing

Low Battery

If this LED starts blinking, it means you need to change battery

Help with Setup

USB nano receiver

Mouse is not working?

Is the mouse powered on? Make sure channel is set on ( )
Is the nano receiver securely plugged into a USB port? Try changing USB ports
If the nano receiver is plugged into a USB hub, try plugging it directly into a USB port on your computer
Check the orientation of the battery inside the mouse
Try a different surface. Remove metallic objects between the mouse and the nano receiver

If it is still not working, try steps below to repair mouse and receiver

Re-plug receiver into USB port on computer, make sure channel is set on ( )
Press the connect button on mouse (Keep mouse close to receiver)
If it does not work after 10 seconds, repeat steps A and B

Bluetooth®

Mouse is not working?

Is the mouse powered on? Make sure channel is set on ( or ) Make sure turn on Bluetooth function on your computer
Check the orientation of the battery inside the mouse
Try a different surface. Remove metallic objects between the mouse and computer (laptop)
Set mouse in pairing mode, make sure it is discoverable on your computer and then complete pairing
If it does not work after 10 seconds, repeat step 1 to 3

Reconnection

Under Bluetooth connection (either Bluetooth 1 or 2 )
mouse and keyboard can automatically reconnect to their last connected
computers, but if it fails, you can always re-pair again