SOLUM CD14XTR01WHKSM All in One Dual Wireless Charger User Manual

User Manual

Component List
• Product
• Quick User Manual
Components and separate parts may change.

Copyright ⓒ 2021 Solu M

• Please read the manual to understand how to use the charger safely.
• Connect the charger to the adaptor ( ①), put the mobile device or smartwatch on the charging pad( ②).
• Make sure there is no magnet/magnetic card/metal product left in between the device and the charger. It may not charge the device properly or cause heat damage.
• If the device supports high-speed charging, it will charge faster.
• Please put the devices in the middle of the charging pad for a speedy and safe charge.
• For high-speed charge, 15W or above PD supported, or AFC, QC2.0/3.0 adopter must be used.
• The charger is only compatible with USB Type-C. Please check your USB connector type.
• The mobile device can be charged with a case cover, but it may not charge properly if the case is too thick.
• Connector (USB Type C) can generate heat while charging. Do not touch the connector

Product A/S and Safety Precautions

• Please state the conditions of the product and your contact information when submitting an A/S request.
• Please contact the supplier or contact SoluM CS center at 1588-0502 if defects occur.
• All in one Wireless Charger’s warranty period is 6 months after purchase.
• If the charger malfunctions due to a defective charger, SoluM will recover/inspect the charger and send you the new product.
• If a recovered product defect occurred due to the customer, the shipping fee will be charged to the sender.
• Precautions for Use
  – Do not store in a hot place.
  – Keep out of reach of children or pets.
  – Do not shock the product such as dropping.
  – Do not arbitrarily modify or fix the product.
  – No free warranty if the product damage occurred due to the above reasons.

Product Specification

height) 75mmx 120mm x 12mm
Release Date| Separately Marked
Warranty Period| 6 months| Weight| 50g

Free Warranty Service

• Free warranty guaranteed as below.
Non-faulty or customer faults does not apply.

Damage Cases

|

Warranty

---|---
Under Warranty| After Warranty
Damaged during delivery| Within 7 days after purchase| Exchange or Refund at the store| Not Applicable
A malfunction occurs under  warranty (6 months)| Within 7 days
after purchase| After the supplier retrieve and inspect the product it  will be either exchanged or refunded| Not Applicable
7 days after purchase| After the supplier retrieve and inspect the product,
it will be exchanged| Not Applicable

Paid Service
• Fees will be charged regardless of warranty if the products are non-faulty or damaged due to the customer’s fault.

Damage Cases

|

Warranty

---|---
Under Warranty| After Warranty
Damaged due to customer’s faults| Partial Repairs are not possible / Customer may purchase  a new product| Not Applicable

1. Damaged due to customer’s faults
   • Mishandling of products
   • When precautions are not followed

2. Other reasons
   • Damaged due to natural disasters
   • Both mishandling and warranted defects are found
   Service can be denied due to the below reasons,
   • Arbitrarily modify, copy or use imitated parts
   • If the parts have been changed from the time of the purchase

FCC Warning

S this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm of the radiator of your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>