SOLUM EL035F6W4A Electronic Labeling Radio User Guide
- May 15, 2024
- SOLUM
Table of Contents
E-label Declaration
EL035F6W4A Electronic Labeling Radio
FCC ID: 2AFWN-EL035F6W4A
FCC §2.935 Electronic labeling of radiofrequency devices.
(a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device.
Information | On e-label | In Manual |
---|---|---|
FCC ID number | Yes | Yes |
15.19 Statement (“This device complies with part 15 of theFCC Rules. Operation
is subject to the following twoconditions: (1) This device may not cause
harmful interferenceand (2) this device must accept any interference
received,including interference that may cause undesired operation.”)| No| Yes
Class A Digital Device user manual statement| –| Yes
Caution to the user that changes or modifications not expresslyapproved by the
party responsible for compliance could voidthe user’s authority to operate the
equipment| –| Yes
Image of the e-label screen is provided below:
(b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related website, if such a web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification.
The user manual presents:
3.5 E-Label
[Accessed by the user]
- Step1 : Buttom 1. 3seconds click.(screen off)
- Step2 : Buttom 1. 3seconds click.(screen on. E-label is active for 1 minute.)
(c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access.
We can access it in two steps.
(d) The electronically displayed FCC Identifier, warning statements, or
other information must be displayed electronically in a manner that is clearly
legible without the aid of magnification;
Yes
(e) The necessary label information must be programmed by the responsible
party and must be secured in such a manner that third-parties cannot modify
it.
The user cannot modify the e-label information.
(f) Devices displaying their FCC Identifier, warning statements, or other
information electronically must also be labeled, either on the device or its
packaging, with the FCC Identifier or other information (such as a model
number and identification of a webpage that hosts the relevant regulatory
information) that permits the devices to be identified at the time of
importation, marketing, and sales as complying with the FCC’s equipment
authorization requirements. Devices can be labeled with a stick-on label,
printing on the packaging, a label on a protective bag, or by similar means.
Any removable label shall be of a type intended to survive normal shipping and
handling and must only be removed by the customer after purchase.
The FCC ID is present on the product packaging.
Regards,
NAME: Ki Dong Lee
Applicant: SOLUM CO.,LTD.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>