Rebel ZAR0472 Ceiling LED Lamp Instruction Manual

Rebel ZAR0472 Ceiling LED Lamp

Product Usage Instructions

Safety Instructions

• Please read this operation instruction carefully before first use, and keep it for future reference.
• If there are any doubts concerning correct installation, please consult a qualified specialist.

Mounting Instructions

Read the manual before mounting. Mounting should be performed by an appropriately qualified person.
Check for proper mechanical fastening and connection to electrical power prior to first use.

1. Cut off the power before installation.
2. Remove the mounting bracket from the LED lamp.
3. Drill holes in the wall and screw the bracket onto the wall.
4. Connect the wiring.
5. Re-attach the lamp to the bracket and ensure that it has been mounted securely.

FAQ

• Q: What is the power of the LED lamp?
  • A: The power of the LED lamp is 36 W.
• Q: What is the color temperature of the LED lamp?
  • A: The color temperature of the LED lamp is 4000 K.
• Q: What is the luminous flux of the LED lamp?
  • A: The luminous flux of the LED lamp is 3600 lm.
• Q: What is the efficiency of the LED lamp?
  • A: The efficiency of the LED lamp is 100 lm/W.

SAFETY INSTRUCTIONS

Please read this operation instruction carefully before first use, and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.

1. If the device or any of its part is damaged, do not use it and unplug it from power source. Do not repair the device yourself. Contact with an authorized service point for check-up/repair.
2. Prior to any maintenance services, disconnect power supply and let the device cool down.
3. Do not cover the device.
4. WARNING: Do not look directly at LED light beam!
5. Clean the device with soft and dry cloth. Do not use chemical detergents.
6. Failure to follow these instructions may result in fire, burns, electrical shock, physical injury and other damage.
7. This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
8. Fixed power cable may only be replaced in an authorized service point.

MOUNTING

Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Check for proper mechanical fastening and connection to electrical power prior to first use.

1. Cut off the power before installation.
2. Remove the mounting bracket from the Led floodlight. Drill the wall and screw the bracket onto the wall using suitable plastic wall plugs and screws. Check that the bracket is securely fitted on the wall.
   • Note: Do not re-attach the lamp to the bracket yet.
3. Connect the power cords:
   • brown wire of the lamp with Live wire of the electrical wiring;
   • blue wire of the lamp with Neutral wire of the electrical wiring;
4. Re-attach the lamp to the bracket and ensure that it has been mounted securely.

Tips

• Do not install when it is raining.
• For outdoor installation, a location under eaves is preferable.
• Do not allow sunlight to fall directly on the unit.

SPECIFICATION

In set

| 2 metal clips, 4 screws, 4 plastic dowels

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the Retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>