GIBI2-C Charger User Manual
- June 3, 2024
- Gibi
Table of Contents
2-C Charger
User Manual
GIBI2-C Charger
Thanks for getting Gibi!
Follow these steps to get started. For more information, see
getgibi.com/FAQ.
- Unbox the Gibi tracker and accessories. Slide the Gibi tracker out of the attachment clip.
- Start charging the Gibi tracker by connecting the charger kit and inserting the Gibi tracker. If using a wall outlet, use a power strip with surge protection,
- To create your Gibi account and activate the Gibi tracker, scan the QR code or go to login.getgibi.com.
REQUIRES: Gibi subscription service Smartphone, computer, or tablet with internet access
Scan the QR code to get started.
Gibi Charger Cradle
Gibi Device on Gibi Collar Clip
Charger Cable
USB to A/C Power Adapter Follow the four simple steps to get your dog Gibi’d
and to help keep your dog safe.
step 1 Charge your Gibi
- Attach cable mini USB end to charger cradle.
- Attach cable USB end to power adapter (or to a computer USB port, then skip to 4 below).
- Plug power adapter into wall outlet.
- Slide Gibi device into charger in direction of grey arrow on top of device.
The light will be GREEN for about 20 seconds while it connects with the Gibi network, then RED while it charges, then GREEN again when fully charged. You will also get a fully charged alert. See FAQ on button light at getgibi.com /FAQ for more info. A fully depleted battery will take about 2 hours to fully charge.
2 Create and set up your Gibi account
Using a computer or tablet, go to login.getgibi.com. Click Create Account and
fill in your info. Once you create your account, you can:
Access using smartphone.
Create safe zones to receive alerts if your dog is in or out of an assigned
safe zone.
Get your dog’s current location and see your dog’s tracks (Pet History).
Set up alerts to be sent to family and friends.
3 Help Gibi get oriented
If you already see a paw print on the map, your Gibi is oriented and you can skip to Step 4. Otherwise, follow below.
- Once your Gibi is fully charged, slide your Gibi out of the charger.
- Take your Gibi outside to clear line of sight to the sky.
- Wait up to 15 minutes until a paw print shows on the map. Once you see a paw print on the map, your Gibi is oriented.
To center the map on you dog’s current location, click on the image of your dog (default image is dog silhouette).
4 Attach Gibi to gour pets collar
Thread your own collar through Gibi clip as shown. Then Slide Gibi device onto the clip. You will hear a click when attached properly.
GIBI INFO
Gibi User Guide Review the user guide before using Gibi. Go to
getgibi.com/gibi-quick-start-guide. Retain documentation for future reference.
Safety and Handling Review “Safety, Handling, & Support at getgibi.com/gibi-
safety-handling-support.
Exposure to Radlo Frequency Energy This device is designed to be used on pets
and humans. Go to getgibi.com/rfexposure.
Battery The lithium-polymer battery in Gib should be replaced only by Gibi
Technologies Inc. or a Gibi Authorized Service Provider and must be recycled
or disposed of separately from household waste. For information about battery
recycling and replacement, go to getgibi.com/battery-recycling-and-
replacement.
Charging and discharging The Gibi device is powered by a rechargeable battery.
When the battery voltage drops below low battery threshold, the device needs
to be charged. The battery can be charged and discharged hundreds of times,
but it will eventually wear out. Recharge Gibi device only with Gibi
Technologies Inc. approved chargers designated for this Gibi device.
Unplug the charger from the electrical plug and the Gibi device when not in
use. Do not leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged battery
will lose its charge over time.
Never use any charger that is damaged. Leaving the Gibi device in hot or cold
places, such as in a closed car in summer or winter conditions, will reduce
the capacity and lifetime of the battery.
Do not dispose the Gibi device in a fire as it may explode. Dispose of Gibi
device according to local regulations. Do not dispose as household waste. Do
not dismantle the device. In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes. In the event of such a leak,
flush your skin or eyes immediately with water, or seek medical help.
Gibi Ninety-Day Limited Warranty Summary Gibi warrants the included
hardware product and accessories against defects in materials and workmanship
for ninety days from the date of original retail purchase. Gibi does not
warrant against normal wear and tear, nor damage caused by accident or abuse.
To obtain service contact Gib at
[email protected]. Shipping
charges may apply. Subject to the full terms and detailed information on
obtaining service available at
getgibi.com/gibi-hardware-warranty, if you submit a valid claim under this warranty, Gib will either
repair, replace, or refund your Gibi at its own discretion. Warranty
benefits are in addition to rights provided under local consumer laws. You may
be required to furnish proof of purchase details when making a claim under
this warranty.
Regulatory Regulatory information, certification, and compliance marks
specific to Gibi are available at
getgibi.com/regulatory.
Additional regulatory information is in “Safety, Handling, & Support” at
getgibi.com/gibi-safety-handling-support.
GIBI GPS TRACKER (GIBI2)
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure warning
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S.
Government.
The exposure standard employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for
SAR are conducted using standard operating positions accepted by the FCC with
the EUT transmitting at the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this device is on file with the FCC and can be
found under the Display Grant section of
https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
after searching on FCC ID: 2ABUGGIBI02
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
GIBI GPS TRACKER (GIBI2)
Industry Canada Equipment Standard for Digital Equipment (ICES) –Canada
Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3
(B)/NMB-3(B)
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Innovation, Science and Economic Development Canada(ISED) Compliance
Statement
This device complies with ISED’s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the ISED Specific
Absorption Rate (“SAR”) limits when operated in portable exposure conditions.
(Antennas are greater than 5mm from a person’s body).
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
GIBI CHARGER (GIBI2-C)
Industry Canada Equipment Standard for Digital Equipment (ICES) –Canada
Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3
(B)/NMB-3(B) Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Innovation, Science and Economic Development Canada(ISED) Compliance
Statement
This device complies with ISED’s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF
Exposure limits under mobile exposure conditions. (antennas are greater than
20 cm from a person’s body).
Need help?
We are obsessed with making sure our customers are happy and proud to do
business with Gibi.
Our customer service team sincerely engages with customers via phone, text,
and email. We are dedicated to help everyone that reaches out to us.
Every question or concern is important to us. Even though our posted phone
support hours are Monday-Friday 9AM-4PM, Pacific time, leave a message and we
will get back to you after hours as well.
getgibi.com
[email protected]
1-844-GETGIBI (1-844-438-4424)
References
- Battery Recycling and Replacement - Gibi Pet GPS Tracking
- Gibi Hardware Warranty - Gibi Pet GPS Tracking
- Gibi Quick Start Guide - Gibi Pet GPS Tracking
- RF Exposure - Gibi Pet GPS Tracking
- FCC OET Authorization Search