Shenzhen Cyton Intelligence Technology Q3 Battery Camera User Guide
- June 6, 2024
- Shenzhen Cyton Intelligence Technology
Table of Contents
Battery Camera Q3
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
QUICK GUIDE
Manufacturer: SHENZHEN CYTON Intelligence Technology CO., LTD
Address: F/L 601, Building K, Jingchangda, No. 2000089 Shangwei
industrial zone, Zhangkengjing community, Guanhua street, Longhua District,
Shenzhen, China
What’s in the box
Please consult this checklist for all parts.
Speaker
Status light
Microphone
Lens
Photosensitive| PIR
Reset
Micro USB
Charging indicator
Power button
SD card slot
---|---
Power port| DC 5V±10%
---|---
Power on/off| Press the button for 3 seconds to turn on/off the camera
Status light| ♦ Solid red light on: the camera is turning on or malfunctional
♦ Blinking red light: awaiting WiFi connection (slowly blinking) connecting
the WiFi (quickly blinking)
♦ Blinking blue light: currently connecting
♦ Solid blue light on: the camera runs correctly
SD card slot| Support local SD card storage (Max.128G)
Reset| Press and hold on for 5 seconds to reset the camera
Charging indicator| ♦ Solid red indicator on: battery is charging
♦ Solid blue indicator on: charging completed
Battery capacity| 9400mAh (two 21700 lithium-ion batteries)
Install
Bracket Installation
- Fix the bracket on the wall
- Install the camera in the bracket and lock it with the screw
Connect
Download
CloudEdge is available for both iOS and Android OS. Search the name
‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the
App.
Support
Add device
Log in the CloudEdge, select “Add Device”, and add the smart camera to the App
according to the screen tips(Make the smart camera close to the router when
configuring).
NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App. Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened;Message notification and authority
confirmation in the mobile phone system have been opened.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>