aTLi EON B088BXQ8ZF Time Lapse Camera for Photography User Guide

QUICK USER GUIDE

In the Box

1. Power Button
2. External Flash Interface
3. USB Type C (For Power Only)
4. Status LED
5. Focus Ring
6. Focus Mark
7. Micro SD Card Slot
8. Battery Cover Opening Slot
9. Tripod Mount (Size: 1/4” – 20)

Installing the Battery

a. Open the cover by pulling from the Battery Cover Opening Slot.
b. Insert Battery as shown.
c. Close the cover.

Installing the aTLi Cam app

Use a smartphone to scan the QR code below and then proceed with the app installation.

https://app.atliview.com/

Registering the Camera

a. Press and hold the power button for 4-5 seconds to turn on the Camera. Wait approximately 30 seconds, until the Status LED changes from ORANGE to GREEN.
b. Launch the aTLi Cam app and then click on Add Camera
to scan the QR code below.

Fitting the Silicone Case

Fitting the Lens Hood

Installing the UV Filter

Mounting the Mini Tripod

Using the Adaptor Nut (1/4”-20 Nut)

Note: when the Camera is fitted in a Protective Silicone Case, the mounting screws of some tripods may be too short, in which case the Adapter Nut should be used.

Using the Lens Hood

The Lens Hood can prevent glare and improve image quality in different lighting conditions. For example, it can reduce glare caused by indoor light reflections when shooting through a window.

Adjusting Camera Focus Manually

a. Turn the focus ring fully clockwise to set the camera focus for objects at distances ranging from 80 cm to infinity. This is the factory preset focus setting.

b. By turning the focus ring anti-clockwise and previewing the image via the aTLi Cam app, you can set the camera focus for objects ranging in between 7 to 80 cm away.
Please turn the ring slowly and steadily until the image is sharp.

Basic Specifications

Lens: 4 Glass Elements
Aperture: F2.8
Field of View: 72°±5%
Photo Resolution: 2688 ×1520 Pixels
Video Resolution : 1080P
Pixel Size: 2µm2µm
Pixel Size: 2µm2µm
IR Cut Filter: App Control
Focus Mode: Manual
Focus Range: 7cm to Infinity
Exposure Metering: Center-Weighted/Partial-Weighted
Shutter Speed: 1/20000 – 1.4s
Language: English
APP: iOS/Android
APP: iOS/Android

Storage and Connectivity
Storage: 16GB Micro SD Pre-installed (Support Up To 128GB)
Wi-Fi: 802.11n (Approx. Range 5 Meters Radius)

Photo / Video
Photo Format: JPEG
Video Format: H.264 MP4
Play Back Frame Rate: 25fps
Exposure Compensation: ±4EV
ISO: 100 – 4000
Shooting Mode
Shooting Mode: Time-Lapse/Photo/Video

Battery / Charging
Battery Type: Li-ion
Capacity: 2050 mAh
Voltage: 3.7V
Charging Limited Voltage: 4.2V
Charging Method: USB Cable
Operational Environment : 0
Operational Environment : 0℃ – 40℃

Design
Weight: 125g (With Battery) 84g (Without Battery)
Dimension : 547050 mm

Scan to watch

https://www.youtube.com/watch?v=8LGE1NI9lH0

ATLI EON Beginner’s Tutorial

Search #aTLiTimeLapse to find us on:

aTLi EON includes a one-year limited warranty, please visit www.atliview.com/warranty.
Atli W world Lim cited
www.atliview.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>