nVent Cfeb05 Concrete Fixing Eyebolt Screw Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent Cfeb05 Concrete Fixing Eyebolt Screw
Product Information
WARNING
nVent products must be installed and used according to the instructions provided in nVent’s product instruction sheets and training materials. Failure to follow these instructions may result in product malfunction, property damage, serious bodily injury, and death, and may void your warranty. Instruction sheets can be found at www.nvent.com or obtained from your nVent customer service representative.
Contact Information
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
Our powerful portfolio of brands:
- nVent
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© All brands mentioned are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparation
Ensure you have the necessary tools and equipment for the installation:
- Concrete or brick surface to install the eyebolt screw
- Drill with a compatible drill bit adapter
- Safety goggles and gloves
Step 2: Marking the Hole
- Decide on the location for the eyebolt screw and mark the spot on the concrete or brick surface.
Step 3: Drilling the Hole
- Attach the compatible drill bit adapter to the drill. Set the drill to the recommended speed for drilling into concrete or brick. Place the drill bit at the marked spot and start drilling. Apply steady pressure while drilling until the hole reaches the specified hole size (HS) of 0.256 inches.
Step 4: Inserting the Eyebolt Screw
- Take the eyebolt screw and insert it into the drilled hole. Rotate the screw clockwise using a wrench or pliers until it is securely fastened in the concrete or brick surface.
Step 5: Testing the Installation
- Apply a static load of up to 160 lb to the eyebolt screw to ensure it is properly installed and can support the intended weight. If the screw holds without any signs of loosening or damage, the installation is successful.
Step 6: Maintenance
- Regularly inspect the eyebolt screw for any signs of corrosion, damage, or loosening. If any issues are detected, replace or repair the screw as necessary to maintain its functionality and safety.
Step 7: Disassembly (if needed)
- If you need to remove the eyebolt screw, rotate it counterclockwise using a wrench or pliers until it is completely unscrewed from the concrete or brick surface.
Frequently Asked Questions (FAQ)
- Q: Can this eyebolt screw be used in other materials besides concrete and brick?
- A: No, this eyebolt screw is specifically designed for use in concrete and brick surfaces only.
- Q: What is the maximum static load that this eyebolt screw can support?
- A: The eyebolt screw has a maximum static load capacity of 160 lb.
- Q: Can I reuse the eyebolt screw if I need to remove it?
- A: Yes, you can reuse the eyebolt screw if it is undamaged during removal. Inspect it carefully before reinstallation to ensure its integrity.
CONCRETE FIXING EYEBOLT SCREW
FEATURES
- For use in concrete and brick
- Includes drill bit adapter for easy installation
SPECIFICATIONS
Catalog Number
|
Material
|
Finish
|
Hole Size(HS)
|
Screw Length(L)
| Screw Diameter(Sc )|
A
|
Drill Bit Diameter
|
Static Load(F)
---|---|---|---|---|---|---|---|---
CFEB05
|
Steel
| Electrogalva sized|
0.256″
|
1.770″
|
H6
|
2.360″
|
0.197″
|
160 lb
DIAGRAMS
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction,
- property damage, serious bodily injury and death and/or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
nVent.com. CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent