MINISO X16 Lightweight TWS Earphones User Manual

MINISO X16 Lightweight TWS Earphones User Manual

Product Overview

1. Touch button of earphones
2. Indicator light of earphones
3. Charging Contact of earphones
4. Button of charging case
5. Charging port & battery indicator light of charging case

PARAMETERS

MUSIC PLAYBACK
TIME| 3h (70%u volume )| TALK TIME| 2h

INSTRUCTIONS

power)
Turn off| Return the earphones to the charging case (which should have power)
Pairing mode| Take the earphones out of charging case, then they will pair with each other automatically.
| Operate on the earphones
Play/Pause| Tap the touch button once on the left or right earphone
Volume down| Tap the touch button twice on the left earphone.
Volume up| Tap the touch button twice on the right earphone.
Previous Track| Click the touch button on the left earphone three times.
Next track| Click the touch button on the right earphone three times.
Answer/end a call| Tap the touch button once on the left or right earphone
Reject a call| Hold the touch button on the left or right earphone for 3s.
Voice assistant| Hold the touch button on the left or right earphone for is to 2s to activate voice assistant.

CAUTIONS

1. Reasonable control of the volume and time of usage is required to avoid hearing damage.
2. For your safety, do not use it in potentially hazardous condition.
3. Do not listen to music, call up or answer the phone while driving to avoid danger caused by distraction.
4. Keep it out of reach of children to avoid danger caused by improper use.
5. Do not throw it to avoid damage caused by dropping.
6. Do not store it under -10°C or above 50°C to avoid shortening the lifespan of earphones and battery.
7. Do not modify, disassemble and repair the product.
8. Irreplaceable battery. It should be disposed of according to local rules & regulations or be recycled by professional institute. Do not throw away or toss it into fire.
9. When not in use for a long time, charge the earphones every 3 months to extend its service life.

ACCESSORIES

• Products 1
• Charging Cables 1
• User Manuals 1

TROUBLESHOOTING

1. Wireless earphones fails to be paired with the phone.
   Solution: Check if the earphones is in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove earphones from the list, follow the instructions of user manual to pair the earphones with your phone again.

2. Cannot turn on the wireless earphones.
   Solution: Check the battery to see if it is low.

3. Can the battery of the wireless earphones be replaced?
   Answer: No. The lithium polymer battery in the earphones is irreplaceable.

4. The wireless earphones got disconnected with the phone within 10 meters.
   Solution: BT is wireless so that it is very sensitive to objects between the earphones and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance.

5. Cannot hear audio playing when the earphones is connected to the computer or phone.
   Solution: Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

6. Can I operate the Apps of my phone through the earphones after connecting the wireless earphones to the phone?
   Answer: Some apps may not support being operated through the earphones due to their settings.

FCC STATEMENT

FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Made in China

www.miniso.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>