Green Key Electronics TW2 Smart Watch User Guide

Green Key Electronics TW2 Smart Watch User Guide

Package Contents

• Smart watch (TW2 wit bands)
  

• Charging cable
  

• Quick start guide
  

Charging

Please fully charge your watch before initial use.

• Insert the USB plug of the charging cable into a USB charger.
• Attach the other end to the charging contacts on the back of the watch.

Installing the Fitdock App

• iOS
  
  iOS 11.0 & above

• FitDock
  

• Android
  
  Android 6.0 & above

Note:  Fitdock app is only compatible with smartphone, not tables or PCs.

Pairing

1. Turn on the Bluetooth of your Phone.
   

2. Open the Fitdock app. Go to the “Device” page and tap “Pair device”.
   

3. Tap “ ” and scan the QR code on the watch to pair. Or tap “TW2” to search the device for pairing.
   OR

Controls

• Function Buttons
  

  • Press

  • Wake the screen

  • Go to the function list

  • Return to the home screen

  • Pause / resume the sport

  • Hold

  • Power on the watch

  • Go to the Restart / Power off / Reset page

  • Unlock the screen

• Touch Screen
  

  • Hold the home screen

  • Change the watch face

  • Swipe

  • Go to different interface

  • Swipe to the right

  • Return to the previous interface

  • Tap

  • Enter the function
    

FCC ID: 2A2KHTW2

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, in accordance with section 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC: 27508-TW2

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by GREEN KEY ELECTRONICS CO., LIMITED may void the FCC authorization to operate this device.

Note:

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement:

The device compliance RF exposure requirement and can installed and used without restriction.

EC REP
Business name: AMZLAB GmbH Business
address: Laubenhof 23, 45326 Essen, Germany
E-mail: info@amz-lab.de
Tel: +491745298066

UK REP
Business name: THEMIS AR support ltd Business
address: 85 Great Portland St, London, United Kingdom, VV1VV 7LT
E-mail: weel.keren@gmail.com
Tel: +447684366863

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>