Shenzhen Hangshi Technology HB220 Bluetooth Wireless Keyboard User Manual
- June 6, 2024
- Shenzhen Hangshi Technology
Table of Contents
Wireless Keyboard
User Manual
Pairing Steps
- Switch OFF/ON to ON, the power indicator will light up for 3 seconds.
- Press the “Connect” button to enter pairing mode. The status indicator will start blinking. The keyboard is now ready to connect to your device.
- Activate the Bluetooth function on your device. Select Settings > Bluetooth > On.
- Locate and select “Bluetooth Keyboard” in your Bluetooth menu. The Bluetooth indicator light will stop blinking to indicate a successful connection.
Note:
- Only one device can be actively paired at a time.
- After a successful pairing, your device will automatically reconnect to the keyboard when it is switched on.
- In case of connection failure, delete the pairing record from your device, and try the pairing instructions again.
Sleep Mode
The keyboard will enter sleep mode after remaining idle for 10 minutes.
To activate it, press any key and wait for 3 seconds.
Charging
- Use the included USB cable for charging. Plug one end into the keyboard and the other end into your preferred USB charger. (USB charger is not included.)
- When charging, the power indicator will turn red. Generally, it takes around 2 hours for a full charge. (Output: DC 5 V/500 mA.)
Package Contents
1 x Bluetooth Keyboard
1 x USB Charging Cable
1 x User Manual
Specifications
Bluetooth Version | BLE 5.0 |
---|---|
Operating Range | Up to 33 feet or 10 meters |
Working Voltage | 3.0-4.2 V |
Working Current | 1 mA |
Charging Current | 180 mA |
Sleeping Current | 0.01 mA |
Re-connect Time | 3 seconds |
Stand-by Time | 180 days |
Charge Time | < 2 hours |
Lithium Battery Capacity | 280mAh |
Frequency Band | 2400 to 2483.5 MHz |
Maximum Radio-frequency power | 0 dBm |
Product Overview
- Caps Lock indicator: Cap Lock is on when lit.
- Bluetooth indicator: Flashes blue when the keyboard enters pairing mode.
- Charging indicator: Red while charging. Green when fully charged.
- Power indicator: When the unit is initially turned on, the power indicator will light in blue for 3 seconds.
- OFF/ON button
- Connect button: Press the “Connect” button to enter pairing mode.
- Charging port: Only used for charging.
Keys and Function
ICon
| IOS System|
Android System
---|---|---
| Home| Home
| Brightness –| Brightness –
| Brightness +| Brightness +
| Screenshot| Screenshot
**| Keyboard display| N/A
**| Select all| Select all
| Copy| Copy
| Paste| Paste
| Cut| Cut
| Previous track| Previous track
| Play/Pause| Play/Pause
| Next track| Next track
| Mute| Mute
| Volume –| Volume –
| Volume +| Volume +
| Lock screen| Lock screen
****| Power display| Power display
Trouble Shooting
If your device doesn’t respond to the keyboard, try the following steps:
- Restart your device.
- Switch the keyboard off and back on.
- Delete the Bluetooth keyboard from the search list, then follow the instruction and try to connect again.
- If your keyboard does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging the keyboard.
- If your keyboard does not operate correctly after charging, please contact the authorized retailer.
Safety Tips
- The battery is not replaceable.
- Do not disassemble the product.
- Keep the product away from sharp objects.
- Do not place heavy objects on the keyboard.
- Dispose of the battery according to local laws.
- Keep the product away from oils, chemicals, and organic liquids.
- Use only a damp, soft cloth, like microfibre, to wipe the keyboard.
FCC Regulatory Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IT Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>