Shenzhen Hangshi Technology MW165 Wireless Mouse User Manual
- June 6, 2024
- Shenzhen Hangshi Technology
Table of Contents
Wireless Mouse
User Manual
Package Contents
1 x Wireless Mouse
1 x 2.4GHz USB Receiver
1 x User Manual
Specification
| Dimensions | 104.8163.6238.53mm |
|---|---|
| Operating Range | < 10 meters |
| Power Source | 300mAh |
| Uninterrupted Work Time | 160 days |
| Button Life | 3 million clicks |
| DPI | 800-1200-1600 |
Product overview
Pairing Steps
Step 1. Plug a 2.4G USB receiver into the USB port of the computer.
Step 2. Slide the mouse ON/OFF switch to “ON” to turn on the mouse.
Step 3. On the bottom of the mouse, click the “Connect” button to choose the
2.4G channel.
Power Saving Mode
The mouse will enter sleep mode after being idle for 30 min.
Press any key to wake up.
Power Steps
If there is no light displayed at all, the battery is completely drained.
For this situation, it is time to charge.
Troubleshooting
If you are unable to connect the device to your tablet, please try the following:
- Make sure the device be switched on.
- Make sure the 2.4G USB receiver be inserted into a USB port of the tablet.
- Make sure that there’s enough power in the device.
- Make sure the device are within 10m.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
FCC ID: 2AKHJ-MW165