noxgear NOX01 Wearable Bluetooth Speaker User Guide

**noxgear NOX01 Wearable Bluetooth Speaker User Guide

**

Meet Your 39g

Power, Pair & Charge

• Hold to power on
  The 39g automatically enters Bluetooth pairing when you first power on.

• Pair the 39g to a device via Bluetooth
  Pairing mode is indicated by the LED flashing blue and red

  • On the device you are pairing to, open the Bluetooth menu
  • Locate your Noxgear 39g in the Bluetooth menu and connect
  • When connected the 39g will announce “connected” and is ready to play audio

•   Charge the 39g

  • Connect the micro USB charging cable to a power source
  • Plug USB cable in to the 39g’s charging port
  • While charging the LED glows solid red
  • LED illuminates green when fully charged Charge time is approximately 3 hours. May not arrive with full charge.

Magnetic Mount

Mount the 39g to any magnetic surface. Note: Do not remove magnetic clip when mounting.

Wear With Magent

The magnetic clip can securely hold the speaker during vigorous activity through a shirt, rain jacket, hoodie, fleece and more.

• Slide the magnetic clip downward with your thumb to remove
  

• Position the magnetic clip on the inside of your clothing

Magnet shouic face corviard

• Align the 39g to the magnetic clip for a secure hold
  
  Note: Always place the magnetic,clip bock on the 39g when not in use.

Wear with Clip

• Shirt
  

• Backpack
  

• Visor

• Sports Bra
  

• Belt
  

• Armband

…and many more

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful irterference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dFaler or an experienced radio/TV technician for help.

Canadian Compliance Statement
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Customer Support

Need Help?
We’re here for you.

 facebook.com/noxgear
@noxgear_nation
vwww.noxgear.com

Contact us for support or feedback:
support@noxgear.com
937-317-0199

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>