Saramonic BLINK-1RX TDMA Wireless Microphone System User Manual

TDMA wireless Microphone System TDMA
Wireless Microphone
Blink1 System
FCC ID:2ARN3-BLINK1TX
FCC ID:2ARN3-BLINK1RX
User Manual

Statement

Please read this manual carefully before use and operating and store in strict accordance with the instructions provided. Please retain for future reference. For any issues that cannot be resolved with the user manual, please contact your retailer for assistance, or contact us at: info@saramonic.com.

Cautions

1. Do not use the system underwater or unprotected in rainy conditions. Store in a cool, dry place.
2. Designed for use and storage at normal temperatures. Do not move the unit from overheated to cold conditions frequently, and keep away from heat sources such as heaters and ovens.
3. When in use or when storing, avoid contact with dust and moisture.
4. Do not subject the device to violent impacts, as this can damage the device.
5. To avoid acoustic feedback, do not operate the microphone in close proximity to loudspeakers. 6. For optimal sound performance, do not hold your hand against the lavalier microphone’s head.

General Introduction

The Saramonic Blinkl System is an ultra-compact and extremely lightweight professional camera-mountable dual wireless microphone system. Designed to be extremely versatile, yet exceptionally easy-to-use, it allows users to just turn it on and start shooting. Delivering broadcast-quality sound to the cameras, recorders, mobile devices, and more.

Portable Receiver Blinkl RX

Introduction

The Blink RX is a camera-mountable dual wireless microphone receiver. It features a vivid OLED display, 3.5mm headphone output, and a 3.5mm line out with both TRS and TRRS output cables. Delivering crystal-clear broadcast- quality wireless sound to cameras, recorders, and mobile devices for up to two microphones. With up to 7-hours of battery life per charge, it can also be charged or powered while in use via the USB-C DC 5v port with standard USB chargers and USB battery packs.

Available Blinkl Systems

2xBlinkl TX

Product Structure

1. OLED Display Display menus and settings, please refer to “OLED Display Operation Guide” for more details.
2. POWER Indicator
   Status| Indicator
   ---|---
   Power On/Fully Charged|  Solid Blue Light
    Low Battery| Solid Red Light
   Low Battery (Alarming Status)| Flashing Red Light (Devices will turn off within 10 minutes)
   Charging|  Solid Red Light
3. ® RF Indicator
   Status| Indicator
   ---|---
   Unpaired| Lights Off
   Paired Successfully| Solid Blue Light
   MUTE| Flashing Blue Light
4.     +/- Button (Pairing Button)
   Function| Operation
   ---|---
   +/-| A short press of the SET button to select functions or values shown on the display.
   Pairing| Press the button “+” and “-” simultaneously for more than 3 seconds on the receiver and transmitter at the same time to enter into pairing mode.
5. Power / Mute Button

   ---

Mute OFF

6.  SET Button Long press the SET button to enter the displayed menu. Then, a short press of the SET button to confirm your setting change, or a long press again to exit without saving.
7.  LINE OUT
8.  USB-C Charging Port (DC 5V)
9. 3.5mm Headphone Jack

OLDE Display Operation Guide

1. RF Level Indicator Indicates
   the current signal level.
    The signal is strong (Paired successfully)
   The signal is undetected or the system is unpaired

2. Connectivity
   Paired successfully
   Waiting for pairing

3. Audio Output
   Mute On
   Mute Off

4. Battery Level Indicator
   Displays the RX battery level. Please recharge the device immediately when the indicator starts flashing.
   twill 3 ill Contrast 05
   
   Set Contrast
   If you want to adjust the 0 LED display’s contrast, you can set the contrast from 00-05. Default is “05.”
   17.1111 3 [11 Mute Key Enable
   
   Set Mute Key
   Enable or Disable Mute Key function. Default is “Enable”.
   
   Set Backlight
   Set the LED backlight to ON or Delay by 60, 30, or 10 seconds. The default setting is “Delay 30s.”
   
   Language Setting
   English or 114421511:15C (Chinese) are available. Default is English.
   
   Restore to Factory Default Settings
   
   A version of the Blink1
   RX Version of the Blink RX’s firmware.

Attaching Accessories

Attaching the shoe mount adapter.

1. Attach the belt clip, then hold the receiver upside-down before attaching the shoe mount adapter.
2. Push the bottom of the belt clip to make some space between the belt clip and the receiver.
3. Align the belt clip with the two vertical grooves on the shoe mount adapter and insert the adapter in the direction of the arrow under the belt clip.
4. Push the shoe mount adapter in fully until the belt clip fits into the horizontal groove on the shoe mount adapter’s holder.

Body-pack Transmitter Blinkl TX

Introduction
The Blink TX is a wireless belt-pack transmitter for the Blink RX receiver that features both microphone and line-level 3.5mm inputs. Extremely versatile, it allows users to use the included omnidirectional lavalier and other 3.5mm TRS microphones (sold separately), or a line-level audio source, like a mixer or music player output. Making the Blink system ideal for content creation, interviews, presentations, live streams, podcasts, and much more. It features a one-touch mute button, a vivid OLED display, up to 7-hour battery life per charge and it can also be charged or powered while in use via the USB-C DC 5v port with standard USB chargers and USB battery packs.

Attaching Accessories

1. Attaching a belt clip

Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side.
2. Connecting the microphone

Note: Please turn off the transmitter before attaching or removing the microphone.

3. HOW TO USE

RX can be used for other device types via other cables, like 3.5mm to 3.5mm cable, 3.5mm to Type C cable.

Operation Guide

Before leaving the factory, the device has been paired successfully. If they are disconnected or unpaired, please follow the below steps:

For the Blink1 TX and RX Pairing

1. Turn on the transmitter and receiver by a long press of the power buttons.
2. Press the + and – buttons simultaneously on the receiver for 3 seconds to enter into pairing mode. In this mode, the RF indicators quickly flash a blue light. Then repeat the same step on your transmitter.
3. When paired successfully, the RF indicators light solid blue.
4. You are ready to record.
   Note: The output of receiver RX is a line-level out. You can connect it to a speaker system. To avoid noise during connection, before connecting the receiver to a speaker system or mixer, mute the input or speaker system and do not monitor with headphones while connecting.

Packing List

scan the QR code and flow us
http://weixin.qq.com/r/ikk1LQXEelgFrUFO9xyY
Shenzhen Jiayz Photo Industrial., Ltd
MillSiCSVInit4MPLMA A16 Building, Intelligent Terminal Industrial Park of Silicon Valley
Power, Guanlan, Longhua District, Shenzhen, China S.7″ IL®A164$ A16
400-613-1096
www.saramonic.com 
info@saramonic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>