MINISO D99 We Bare Bears Collection 4.0 Wireless Speaker User Manual

MINISO D99 We Bare Bears Collection 4.0 Wireless Speaker User Manual

DEAR CUSTOMER

Thank you for using Miniso Wireless Speaker. Please read this manual carefully before use. Using it properly for best product performance. MINISO Wireless Speaker has stylish appearance, true-to-life sound and multiple functions. The whole series have the patent of appearance design. The system adopting the industry-leading technology enables you to enjoy the excellent sound effects anytime at home, outdoors, during a trip or during work. It provides perfect experience when you play music on your laptops, digital music players and other audio-visual players, leading you to a better life with beautiful music!

CAUTIONS

1. Store and use it at room temperature.
2. Dos not expose it to rain or moisture.
3. Do not throw the product to avoid damage caused by dropping.
4. Do not disassemble, modify or repair the product yourself.
5. This product is equipped with an irreplaceable built-in lithium battery. Do not discard it or toss in fire to avoid danger.
6. To prevent its performance from being interfered, keep it away from strong magnetic objects.
7. If you are not going to use it for a long time, charge the speaker once every 3 months to extend the lifespan of battery.

PRODUCT PARAMETER

BATTERY
CAPACITY| 3.7V/400mAh| AUDIO CHANNEL
SYSTEM| Stereo sound
CHARGING TIME| About 2h| MUSIC PLAYBACK
TIME| About 3h
INPUT| TYPE-C, DC5V / 0.4A| EFFECTIVE
DISTANCE| 10m

PRODUCT OVERVIEW

1. Power switch:
   Long-press: Power on/off
   Short-press: Play/pause

2. Indicator Light

3. Type-C Charging port

FUNCTIONS

• Switch on: Long press the M button for 3 sec. The indicator light flashes in blue, and a voice prompt will follow.
• Switch off: Long press the M button for 3 sec. The indicator light will go out. Pairing mode: It enters pairing mode automatically after being turned on, and the indicator light flashes in blue.
• Successful pairing: The indicator light turns on in blue, and a voice prompt will follow. To pause/ play the music: Short press the M button.
• Previous/Next track: Control it on your phone after pairing. Volume up/down: Control it on your phone after pairing. Being charged: The indicator light turns on in red.
• Fully charged: The indicator light goes out. Low battery: It will beep three times, once in a minute before switching off automatically.

ACCESSORIES

• Type-C charging cable x l
• Wireless speaker x l
• User Manual x 2

TROUBLESHOOTING

1. The wireless speaker is unable to be paired with the cell phone.
   Solution: Confirm if the wireless speaker is in pairing mode, and if the Bluetooth on your phone is toggled on. Then delete the product in the list, pair it with your phone again according to the User Manual.

2. The wireless speaker is unable to be turned on.
   Solution: Confirm the battery level. Charge the speaker if it is needed.

3. Can the battery of the wireless speaker be replaced?
   Solution: No, this is lithium polymer battery, which is irreplaceable.

4. Can I use the wireless speaker at a high volume for a long time?
   Solution: To extend the lifespan of the wireless speaker, it is not recommended to play it at a high volume for a long time.

5. The link between the wireless speaker and the cell phone has been disconnected within 10 meters.
   Solution: Bluetooth is wireless so that it is very sensitive to objects between the speaker and the connected device. Check if there are any metal or other objects that may affect connection within the effective distance.

6. Cannot hear audio playing when the speaker is connected to the computer or phone.
   Solution:Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.

7. Can I operate the Apps of my phone through the speaker after pairing the wireless speaker with the phone?
   Solution: Some apps may not support being operated through the speaker due to their settings.

FCC Warning

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS-102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>