Baseus BS-PF001 T2 Pro Smart Device Tracker User Manual
- June 6, 2024
- Baseus
Table of Contents
BS-PF001 T2 Pro Smart Device Tracker
User Manual
PRODUCT PARAMETERS
Name: Baseus T2 Pro Smart Device Tracker
Model No.: BS-PF00l
Material: PC
Product size: 35 x 33.2 x 8.1mm
Product weight: 8g
Rated voltage: 3V
Rated power: l0mW
Rated current: 3.3mA
Volume: 80-100dB
Battery: CR2032 240mAh@3V
Battery life: more than 12 months (calculated by 15 times per day)
Working distance: Within 30m radius for open outdoor and
indoor spaces, 10m radius for common indoor spaces
Accessories: Lanyard’l
PRODUCT PART NAME
DOWNLOAD APP
Search for the “Baseus App” in the App Store, scan the QR code on the manual to download and install the app.
https://bds-api-cn.baseus.com/app/official/download
APPLY STARTUP PERMISSION SETTINGS
Please keep the “Baseus App” running in the background continuously. This ensures that the mobile phone can receive alarms and reminders from the smart device tracker normally. Click Settings Start the app App startup management Manually start the app: Allow automatic startup, associated startup, and background activities. Turn off the Power Saving Mode and the Do Not Disturb function in the system interface on the phone
CONNECT TO DEVICE (ANDROID)
- After downloading the APP, turn on the “Wireless function and GPS function”.
- Turn on “Wireless”, click “Settings” Turn on “Geographical Location” Turn on “Location Services”.
*Please keep the network smooth when connecting the device.
CONNECT TO DEVICE (IOS)
- After downloading the APP, turn on the “Wireless function and GPS function”.
- Allow Wireless function Allow the app to use your geographical location Click the “Allow” button.
- Allow notifications Click the “Allow” Allow “Baseus App” to send you notifications.
*Please turn on the Wireless function and keep the network running smoothly when connecting to devices.
• Go to the home page and click the”+” in the upper right corner to bind your device.
• Go to the page “Add device” and click “T2 Pro Smart Device Tracker” to add the device.
• After the device is added, place the device close to the mobile phone and press the “Button” for 3 seconds until you hear a “Beep” sound.
• Device connection is completed, click Find.
DEVICE SETTINGS
Alarm Mode:
- Go to the “Device Settings” page or, turn on/off the mobile phone alarm or Smart Device Tracker alarm.
Mobile phone alarms (Set phone ringtones):
- Select the ringtone you prefer.
“Do Not Disturb Mode” Settings (set Do Not Disturb mode):
- Add an area to limit disturbances. Set the name, time period and area to not be disturbed.
- When the setting is completed, return and click the “Save” button.
NOTES
-
Remove and replace the battery: Open the back cover of the Smart Device Tracker to replace the battery. After replacement, close the back cover, and then push lightly until it is locked.
( Note: please use a CR2032 button battery for replacement) -
Do not use this product in a humid environment.
-
This product is not a toy, please keep children away from the device to avoid accidental ingestion.
-
Do not use liquid, spray cleaner, or wet cloth to clean this product.
-
Keep away from water sources and heat sources during use to avoid damage to the product and potential safety hazards.
This equipment complies with the provisions of Directive 2012/19/EU, 2006/66/EU. It is strictly forbidden to dispose of this equipment with the ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
This device complies with part 15of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive
Standard: Q/SSCZ 037-2019
Hotline: +86-4000-712-711 Website: www.baseus.com
Designed by Baseus
Made in China
PB3319Z_POAO
Documents / Resources
|
Baseus BS-PF001 T2 Pro Smart Device
Tracker
[pdf] User Manual
PF001, 2AY37-PF001, 2AY37PF001, BS-PF001, T2 Pro, Smart Device Tracker, T2 Pro
Smart Device Tracker, BS-PF001 T2 Pro Smart Device Tracker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>