MACALLY Rechargeable Bluetooth 35-Key Numeric Keypad User Guide

RECHARGEABLE BLUETOOTH
35-KEY NUMERIC KEYPAD
User’s Guide

Introduction

Thank you for purchasing the Macally product. The Macally BTNUMKEYPRO, o rechargeable Bluetooth numeric keypad, allows professionals to efficiently enter long sequences of numbers in spreadsheets, accounting programs, calculators and increase their productivity. Thanks to its slim and wireless design, you can keep your desk clean and store it anywhere without cable clutter. You can put it easily in a bag and take it with you when on the road. The built-in 300mAh rechargea­ble battery will power the BTNUMKEYPRO up to 1 month before the next charging is required.

Before you begin using this product, be sure to read this user’s guide in its entirety.

Package Contents

• BTNUMKEYPRO
• USB charging cable
• User’s Guide

System Requirements / Technical Support

• Bluetooth enabled computer or mobile device
• Mac OS X v10.6 or later; Windows 7/8/10
• iOS 8.0 or later; Android 6.0 or later

Technical Support

Please E-mail us at [email protected], or call us at 1-909-230-6888 Monday to Friday, 8:30 AM to 5:30 PM, Pacific Standard Time

FAQ & help – https://help.macally.com/help

Manual and driver download – htips://us.macally.com/pages/drivers-and- downloads

Macally Product Information

This manual is furnished under license and may be used or copied only in accordance with the terms of such license.

Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of Macally Peripherals.

The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Mocolly Peripherals. Molly Peripherals assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

Macally is o trademark of the Moce Group, Inc. All other product names, trademarks and registered trademarks in this document are the property of their respective holder.

Copyright® 2019 by Macally Peripherals

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty

Molly peripherals warrant that this product will be free from defects in title, materials, and manufacturing workmanship for one year from the date of purchase. If the product is found to be defective then, is your sole remedy and os the manufacturer’s only obligation, Macally will repair or replace the product. This warranty shall not apply to products that have been subject to abuse, misuse, abnormal electrical or environmental conditions, or any condition other than what can be considered as normal use.

Warranty Disclaimers

Macally Peripherals makes no other warranties, express, implied, or otherwise, regarding the BTMLUXKEY, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have that vary from state to state.

Limitation of Liability

The liability of Macally Peripherals arising from this warranty and sole shall be limited to a refund of the purchase price. In no event shall Macally Peripherals be liable for costs of procurement of substitute products or services, or for any lost profits, or for any consequential, incidental, direct or indirect damages, however, caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply notwithstanding any failure of the essential purpose of any limited remedy. V1.1.

Hardware Basics

Pairing the keypad with Mac

1.  Make sure the keypad is on and fully charged. Then press and release the Pair button on the front side of the keypad to set the keypad into pairing mode (flashing blue LED).

2.  Click on the Bluetooth icon located in the upper right corner of your Mac’s menu bar. Make sure Bluetooth is “ON” then select “Open Bluetooth Preferences” from the drop-down menu.

3. From the Bluetooth screen, wait for the Macelly Bluetooth Keypad to show up then click on “Pair” or “connect” to add it. NOTE: It may take up to a minute for the device to show up on the screen. (Screenshot below is for reference only.)

4.  Once pairing is completed the Bluetooth keypad will show “Connected”. If you are having issues connecting, try turning Bluetooth off then turn it on and try re-pairing the keypad again. (Screenshot below is for reference only.)

5. Please close the “Keyboard Setup Assistant” window if seen. It is ready to use.

Pairing the keypad with Windows PC

1. Make sure the keypad is on and fully charged. Then press and release the Pair button on the front side of the keypad to set the keypad into pairing mode (flashing blue LED).

2. Open your windows Bluetooth settings and click on “Add a device”.

3. From the Bluetooth screen, wait for the Macelly Bluetooth Keypad to show up then double click on it to add it.
   NOTE: It may take up to a minute for the device to show up on the screen. (Screenshot below is for reference only.)

4. After a short period, Windows will show the following screen indicating that the keypad is now paired with the computer. Please note that the driver installation may take a few minutes. Windows will notify you when the keypad is ready to use. [Screen shot below is for reference only.)

Please note that if you are using a different Windows OS version, your screen may differ from the above diagrams.

Pairing the keypad with iPad/iPhone

1. Make sure the keypad is on and fully charged. Then press the pair button on the front side of the keypad to set the keypad into pairing mode [flashing blue LED).

2. Bring your iPad or iPhone nearby the keypad. Open up “settings” then Bluetooth.

3. Turn on Bluetooth, under the “Bluetooth” menu, it will auto search for the new Bluetooth devices…

4. Once it finds and displays Macally BTNUMKEYPRO or a similar name, selects it to pair and connect.

5. After pairing is successfully completed, it will show “Macally Bluetooth …. connected–. It is ready to be used with your iPad or iPhone.

Please note that if you are using a different iOS version. your screen may differ from the above diagrams.

Pairing the keypad with your Android Smartphones and Tablets

1. Make sure the keypad is on and fully charged. Then press the pair button on the front side of the keypad to set the keypad into pairing mode (flashing blue LED).
2. In Android device, under –Settings” select Bluetooth. Make sure it is configured to –On” as shown in the picture.
3. Once you see Macelly BTNUMKEYPRO appear, select it and it will automatically pair to your device (The below screenshot are for reference only.).

Please note that if you are using a different Android smartphone or Tablet version, your screen may differ from the above diagrams.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>