MACALLY MB163 Rechargeable Bluetooth Optical Mouse User Guide
- June 6, 2024
- MACALLY
Table of Contents
BTTOPBAT
RECHARGEABLE BLUETOOTH OPTICAL MOUSE
User guide
USER GUIDE
Thank you for purchasing the Mac BTTOPBAT. The Macally BTTOPBAT is a rechargeable Bluetooth wireless optical mouse with an 800/1200/16C0 DPI switch button, two soft-click buttons, and scroll %beet/button for a precise and smooth control The ergonomic and ambidextrous design offers maximum comfort to both left-handed and right-handed users and helps to increase productivity. The 300m4h built-in rechargeable battery will power the BTTOPBAT for up to 2-3 months before the next charging is required. No need to buy and replace batteries anymore! The BTTOPBAT works both with Mac. PC. i0S4PadOS and Android, and doesn’t require any driver.
About this guide
Before you start using the Mace Ily BTTOPBAT, bean to read this guide in
its entirety.
**Safety instructions
**
Please read the following carefully before using this Macally product Incorrect use of this product may result in reduced performance, permanent damage, and void warranty
- Do not place this product near a heat source.
- Operating temperature of 0°C to 40°C. Storage temperature of -20°C to 65°C.
- Do not place this product near moisture or liquids.
- Operate and store at a humidity of 20% to 80% Inon-condensing
- Do not place heavy objects on this product.
- Do not drop this product.
- Do not dispose of this product in the garbage. Take it to your local recycling center.
Package contents
- BTTOPBAT
- Charging cable
- User guide
Hardware basics
Pairing: press and hold down the Pair button for 2 seconds, pairing light
flashes blue in the DPI button.
Installation instructions
The Macelly BTTOPBAT does not require a driver, only a Bluetooth-enabled computer or a mobile device. Simply follow the steps below and you are ready to go!
Paling the mouse with a Mac
- To connect the Bluetooth mouse to your computer, bring it within 1 ft /25 cm range from your computer.
- In your Mac, open ‘Bluetooth” in ‘System preferences. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold down the Pair button for 2 seconds, paling light flashes blue in the DPI switch button.
- Bluetooth Mouse’ will appear in the list of 8kutooth Devices, Please click on ‘Connect’.
- Wien Bluetooth Mouse’ shows connected, you are ready to use the EITTOPBAT.
Paling the mouse with Windows PC
- To connect the Bluetooth mouse to your computer, sign it within 1 ft/25cm range from your computer.
- In your, Windows PC. go to Devices and Printers and select ’13luetooth Devices. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold dam the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- ClideAdd a device’ at the top left comer.
- Bluetooth Mouse will appear, please select it and press ‘Next.
- After a short period, Windows will show a screen indicating that the mouse is paired with the computer. You are ready to use the BTTOPSAT.
Pairing the mouse with Pad and iPhone
- To connect the Bluetooth mouse to your iPad or iPhone, bring them together with hint range.
- Then turn on the mouse, press and hold down the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- In your iPad or iPhone, go to Settings, select Accessibility, tap on Touch, set AssistiveTouch to on: In AssistiveTouch menu, tap Devices under POINTER DEVICES, tap on Bluetooth Devices, it starts searching for a new Bluetooth mouse.
- Once Bluetooth mouse is discovered, select it from the list, iPad or iPhone will prompt you for poking, enter pairing code 0003 from the iPad or iPhone screen keypad, then tap ‘Pair” in the upper right corner.
Once the Bluetooth mouse appears as “Connected”, you are ready to go. A circular pointer cursor will appear on your iPad or iPhone screen, you can mom the circular cursor on the screen, do left and right-click, and scroll pages with a scroll wheel, everything just like what you normally do on a computer.
Paling the mouse with an Android device
- To connect the Bluetcoth mouse to your Android device, bring them together within a 1ft range.
- Then tum on the mouse, press and hold down the Pair button for 2 seconds, pealing light flashes blue in the DPI switch button.
- In your Android device, go to Settings, select Connected devices. make sure Bluetooth is ca, tap to open Bluetooth, tap on Pair new devices, and tap to select the discovered Bluetooth mouse to pair.
- Once the Bluetooth mouse appears Connected in the list you are ready to use the mouse just like what you normally do on a computer. The standard button functions are as follows:
• Left button: Set as left-click single and double clicks
• Right button: Set as right-clicking or menu button
• Scroll wheel: Scroll speed is set as medium
• DPI button: Press the DPI button to change the sensor resolution M0/1200/1600 DPII and set the tracking speed and precision to your preference.
However, if you wish to configure the mouse settings to your personal
preferences you can do this in the settings of the operating system:
Mac OS
To configure the tracking speed, scrolling speed, double click speed, and
primary mouse button, go to Mouse in System Preferences
Windows
To configure the mouse buttons, pointer, pointer options, and wheel go to
Mouse in Hardware/Control Panel.
Important notes
- When you don’t use the BTTOPBAT for a longer period of time, switch it off with the on/oft switch on the bottom of the mouse to conserve the built-in battery
- Battery life may vary depending on the user and computing conditions. A fully charged battery lasts up to 70 hours of use.
Technical support
In USA, please call +1 909 230 6888. or email to techsupport@macally.com.
Technical support hours in USA Canada and South America are from 8:30 AM to
5:30 PM (PT), from Monday to Friday.
Warranty
Macally Peripherals warrants that this product will be free from defects in
title, materials, and manufacturing workmanship for one year in North America
from the date of the purchase. If the product is found to be defective then,
as your sole remedy and as the manufacturer’s only obligation, Macally will
repair or replace the product. This warranty is exclusive and is limited to
the Macally 81TOPSAT. This warranty shall not apply to products that have been
subjected to abuse, issue, abnormal electrical or environmental conditions, or
any condition other than what can be considered normal use. The liability
of*cal& Peripherals arising from this warranty and sale shall be limited to a
refund of the purchase price. In no event shall Macally Peripherals be liable
for costs of procurement of substitute products or services, or for any lost
profits, or for any consequential, incidental, direct or indirect damages,
however, caused and on any theory of liability, arising from this warranty and
sale. These limitations shall apply notwithstanding any failure of the
essential purpose of any limited remedy.
FCC Regulatory Compliance
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This device complies
with Part15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>