pincun UG-05 Wireless Headphone User Manual
- June 6, 2024
- pincun
Table of Contents
UG-05
USER MANUAL
LED Indicator Light Description
Pairing Status | Blue and green LED twinkle alternately |
---|---|
Power On | Blue LED stays on indefinitely, blue LED flashes slowly when music |
playing
Standby Mode| Blue LED stays on indefinitely
Low Battery Status| Blue LED flashes 3 times per second
Vibration Switch| Vibration switch is on: white LED stays on indefinitely
Vibration switch is off: white LED goes out
Charging Status| Red LED stays on while in charging, red LED goes out while
fully charged
Basic Key Operation
Turn On
Long press the headphone will turn on after the blue LED stays on for 3
seconds. The headphone will enter the pairing mode.
Turn Off
Long press the blue and green LED will stay on for 2 seconds, then go out,
and the headphone will turn off.
Volume Adjustment
Short press and to control volume.
Music Selection
Long press to skip to the next song.
Long press to skip to the previous song.
Play/Pause/Phone call
Music Pause: Short press __ when in music playing.
Music Play: Short press when in music pause.
Answer Calls: Short press when a call comes in.
Hang Up: Short press when on a call.
Refuse to Answer: Long press when a call comes in.
When Wireless is connected, double press re-dial the last phone number in your call record.
Headphone Turn On Status
Long press the headphone will turn on, and the blue and green LED will twinkle
alternately. The headphone will enter pairing mode. Turn on the Wireless in
your cell phone and search for “UG-05”, click to connect. The blue LED will
stay on indefinitely after connecting successfully, and the blue LED will
flash slowly when music plays.
*Note: The colorful decoration LED light will turn on automatically after the headphone turns on, and it can be turned off by key combination.
Vibration Function Switch
In the power-on status, flip the vibration switch down, the vibration function
will be turned on (the white LED stays on indefinitely), and the headphone will
vibrate with the bass. The stronger the bass, the stronger the vibration. Flip
the vibration switch upward to turn off the vibration (the white LED goes out),
then you can listen to music and play games normally, the vibrating speaker
will not work, and the music speaker will work normally.
Colorful Decoration LED Switch
After the headphones turn on, the colorful LED light will turn on
automatically. If you want to turn off the colorful LED light for saving
battery or for other reasons, short press the volume up and volume down button
simultaneously to turn the LED off. The colorful LED can be restarted after
turning off.
*Note: The colorful LED light will not work while the headphone is in charging or in wired mode.
Boom Microphone
Equipped with the long boom microphone for a better call experience. The long
boom mic is to enhances the call performance. During a call, if you want to
talk to others, or you don’t want to be heard by the person on the other end
of the phone, short press the mute button on the microphone to stop the mic
from working. When the mute is turned on, the headphone will beep. When you
need to resume the call, short press the mute button again.
Auto off and Long-distance Reconnect
The headphone will be disconnected automatically when out of the effective
range.
When back to effective range within 5 minutes, it will auto-connect with your
phone. The headphone will turn off automatically if out of the effective for a
range of over 5 minutes.
Headset And Wireless Transmitter Overview
Charging Mode
When in a low battery. please charge it for around 3 hours with a USB charging
cable The headphones will be turned off automatically while charging. Red LED
Stays on indefinitely while in charging, and red LED goes out while fully
charged.
Power Status
When the headphone is connected to the OS device, the current power status of
the headphone will be shown on the upper right comer of the device screen.
Line—in Mode
Plug-in the audio cable, the headphone turns off automatically, yOu can listen
to the music with the audio cable. You can use the built-in microphone or long
boom microphone. Also, yOU can turn on or off the vibration function by the
vibration switch. Note: when in line-in mode, the Wireless can’t be turned on.
You need to unplug the audio cable and turn on the headphone to use.
Wireless Transmitter LED Indicator Description
Power On | Red LED stays on indefinitely |
---|---|
Pairing Status | Green LED flashes quickly |
Connection Succeeded | Green LED stays on indefinitely |
For the First Time Us ng
- Insert the Wireless tran matter into the USB port of the device, the device will automatically install the dr ver, the name displayed on the device Is: UG-05 and the default is device audio transmission, the transmitter enters the standby state with the red LED lighting on indefinitely.
- The Wireless device enters the pairing state after power is on. long-press the button on the Wireless transmitter for 2 seconds to enter the pairing status, and the green LED will flash quickly.
- The Wireless transmitter is successfully connected with the Wireless device. and the green LED will stay on indefinitely.
For the Second Time and Subsequent Using
When there is pairing information of the headphones on the device, for the
second time using, the Wireless transmitter will automatically connect back to
the wireless device.
Connect with Other Wireless Devices
Short press the transmitter button. the Wireless transmitter will be
disconnected with the current device with the red LED lighting on
indefinitely, and the Wireless device will be turned off. Long press the
transmitter button for 2 seconds to connect with other devices, the green LED
will flash quickly and stay on indefinitely after connected successfully.
Power On/Power Off
Insert the Wireless transmitter into the USB port of the computer and it will
automatically turn on./Unplug the Wireless transmitter.
Wireless Connection
Long press the transmitter button for 2 seconds, the Wireless transmitter
enters pairing status with the green LED flashing quickly, now it supports
listening to music. Wireless video playback. Wireless video calls. etc.
Wireless Disconnection/Clear Connection
Short press the Wireless transmitter button, and the red LED will stay on
indefinitely./in any state, long-press the transmitter button for 8 seconds,
the green and red light will stay on indefinitely.
Headphone Parameters Information
Profiles Supported | A2DP/AVRCP/SMP/HFP |
---|---|
Receiving distance | 8-10M |
Sound Speaker Resistance | 320_15% |
Sounding Horn Unit | 40mm |
Vibration Speaker Resistance | 160215,16 |
Vibration Speaker Unit | 30mm |
Frequency Range | 20 HZ—20K HZ |
Sensitivity | 108:3dB at 1K HZ |
Microphone Sensitivity | -42 I 3dB |
Charging Voltage | DC5V |
Charging Current | 800mA |
Operating Voltage | 3.7v |
Operating Current | 26-120mA |
Wireless Transmitter Parameters Information
Input | USB2 0 |
---|---|
Signal-to-Noise Ratio | >90dB |
Frequency Range | 20H2- –20KilZ |
Transmission Range | 20M |
Operating Voltage | sv |
Operating Current | 14mA—27mA |
Packing List
1. Wireless Headphone| 4. Audio Cable
2. Boom Microphone| 5. User Manual
3. Micro USB charging cable| 6. Wireless Transmitter
7. Mic Foam Cover|
Warm Tips
- Please charge the headphone with a 5V 1A / 5V 2A charger, high voltage may damage the headphone.
- When the headphone has not been used for more than 3 months, it needs to be charged before use.
- When the headphone has not been used for a long time, we suggest you charge them every 3 months to provide good protection for the battery.
- We suggest you fully charge the headphone for the first time use.
Attentions
- Please keep or use the headphone at normal temperature. avoid direct sunlight.
- Please keep the headphone away from fire or other hot objects.
- Please keep the headphone away from damp places or submerged in liquid. keep dry
- Please don’t try to use other methods of charging other than the USB charging cable we provide.
- Please don’t disassemble, repair, or modify.
- Please pay attention to excessive clash, if any damage (like dents, deformation. corrosion. etc.), please turn to us for assistance by the contact information on the warranty card.
- If the headphone produces an abnormal smell, higher than normal temperature. color, or shape changes abnormally, please stop using and turn to us for assistance by the contact information on the warranty card.
Warning
- If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or a similar overheating environment.
- The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
- This product is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.
WARRANTY CARD
Product Model: —————————————————————–
Product Color: —————————————————————–
Purchase Date: —————————————————————–
Purchase Store: —————————————————————-
Purchase Account: ————————————————————
Reason for Warranty: ——————————————————–
User Name: ——————————————————————-
Phone Number: ————————————————————–
User Address: —————————————————————-
Warranty Description
Please keep the warranty card and valid purchase proof properly, show it together when sending the product to repair. If you can’t provide the warranty card or relevant purchase certificate, the calculation date of the product warranty will be based on the product manufacture date.
Warranty Regulations
-
If you have any questions during use, please don’t hesitate to call 4008894883 for help.
-
Within one year from the purchase date, if the product with a quality issue and the technical staff of our company has confirmed that the issue occurs under normal use, we will provide free replacement services.
-
In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
• The product main part has been damaged due to incorrect operation, negligent use, or Irresistible reasons
• The product has been dismantled or repaired without our company authorization
• The headphone driver unit has been used at high volume, and the diaphragm is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
• The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period. -
The free service provided by this warranty card does not include product accessories, and other decorations, gift, etc.
Product Qualification Certificate
After inspection, the product meets the technical standards and is allowed
to leave the factory.
QC 08
PASS
Documents / Resources
|
pincun UG-05 Wireless
Headphone
[pdf] User Manual
UG-05, UG05, 2AMWY-UG-05, 2AMWYUG05, UG-05 Wireless Headphone, Wireless
Headphone, Headphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>