pincun B8 Wireless Bluetooth Headphone User Manual
- June 6, 2024
- pincun
Table of Contents
B8
User Manual
Headphone
Running Status
|
LED Indicator Description
---|---
Pairing| Red and Blue LED twinkle alternately
Turn On| LED light in solid blue, blue LED flash slowly when in music
playing
Standby Mode/ TF Card Mode| LED light in solid blue/green
TF Card Music Play| Green LED flash slowly
Charging| LED light in red while charging, LED light goes off while full
charged
Operation Guidance
Turn On
Toggle switch to turn on position, blue LED will be on for 2 seconds and
then headphone turn on.
Turn Off
Toggle switch to turn off position, red LED will be on for 2 seconds and
then headphone turn off.
Bluetooth Connection (1)
After turn on, the headphone enter in pairing, you need to search the “B8”
on your device and click to connect. When Bluetooth
Bluetooth Connection (2)
headphone is disconnected, it will automatically enter in pairing status and
can be paired with another Bluetooth device.
Volume Adjustment
Short press + or – to adjust volume.
Music Selection
Next Track: Short press
Previous Track: Short press
Play/Pause/Answer the Phone
Music Play/Pause: Short press touchkey
Answer the Phone: Short press touchkey
Hang Up: Short press touchkey when you want to finish a phone call
Refuse to Answer. Long press touchkey
Headphone Turn On Mode
Toggle switch to turn on position, and then red and blue LED twinkle
alternately, headphone enter in pairing mode.
Bluetooth Pairing
Toggle switch to turn on position, headphone turn on and enter in pairing
mode (red and blue LED twinkle alternately). Turn on the Bluetooth on your
cell phone and search “B8”, click to connect. The LED light will be in solid
blue when connected successfully. The blue LED will flash slowly when in music
playing.
Outline Wireframe Map
TF Card Music Play
- When inserting TF card during shutdown, the driver will enter Bluetooth mode.
Mode Switch: Long press the touch button for 6 seconds to switch between TF card mode and Bluetooth mode.
Auto off and Long-distance Reconnect
When Bluetooth headphone in disconnecting, it will auto off after 5 mins for
avoiding energy cost.
The heaphone will hint disconnected when out of the effective range. And when
back to within range, it will auto connect your phone. (Disconnected for over
5mins will auto off)
Factory Reset
When Bluetooth in connecting, long press “Vol +” and “Vol -” for 6 seconds,
red LED quickly flashes 3 times, and then red and blue LED twinkle
alternately, it indicates the factory reset. After reset, the volume defaults
to grade 14/16, and won’t automatically reconnect to the previously connected
phone.
NOTE: It needs to delete the B8 on your phone Bluetooth list and connect
again for the previously connected phone.
Language Switch
Double click “Vol +” in pairing status for language switching.
Line-in Mode
Turn on Status: Plug in the audio cable, the headphone can’t be turned on, can
only listen to the music with the audio cable.
Turn off Status: Plug in the audio cable, the headphone can’t be turned on,
can only listen to the music with the audio cable.
NOTE: If you want to listen to the songs in the Bluetooth or TF card, you
need to unplug the audio cable and turn on headphone to use.
Charging Mode
New headphones with power and support to use several times. When the battery
is low, please charge it for around 3 hours with USB charging cable. The
headphone will automatically shut off during charging. LED light will be in
solid red in charging, and LED light goes off when full charged.
Power Status
When the headphones connected to the IOS device, the current power status of
the headphone will be display in the upper right corner of the device screen.
Parameters Information
Profiles Supported| A2DP / AVRCP / SMP / HFP
Accept Range| 8 ∼ 10M
Speaker Resistance| 320 ± 15%
Speaker Sensitivity| 108 ± 3dB at 1K HZ
Frequency Range| 20 HZ ∼ 20K HZ
Packing List
1. Bluetooth Headphone| 3. USB Charging Cable
2. User Manual| 4. Certification
Charging voltage: 5V| Working voltage: 3.0 ∼ 4.2V
---|---
Charging current : lA| Working current: 30 ∼ 35mA
Warm Tips
- Please charge the headphone with by 1A charger, high voltage charger may making damage to the headphone.
- When the headphone has not been used for more than 3 months, it needs to be charged before using.
- When not use for a long time, we suggest you to charge every 3 months to provide good protection for the battery.
- We suggest you fully charged the headphone for the first time use.
Attentions
- Please keep or use the headphone in normal temperature, avoid direct sunlight.
- Please keep the headphone away from fire or other hot object.
- Please keep the headphone away from damp place or submerged in liquid, keep dry.
- Please don’t try to use other method for charging other than the USB charging cable we provide.
- Please don’t disassemble, repair or modify.
- Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for help via the contact information on your warranty card.
- If the headphone produces an abnormal smell, higher than normal temperature, color or shape changes abnormally, please stop to use and turn to us for help via the contact information on your warranty card.
Warning
- There is a danger of explosion if you replace the battery in improper way. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or similar overheating environment.
- The device should not suffer from water droplets or water splashes, and also should not be placed in vases or similarly objects filled with liquids.
- This product is not belong to children’s toy. Children under the age of 14 are need to be accompanied by their parents to use.
- Using headset at high volume for long periods of time may cause damage to your hearing
WARRANTY CARD
| Product Model: | Product Color: |
|---|---|
| Purchase Date: | Purchase Store: |
| Purchase Account: | Reason for Warranty: |
| User Name: | Phone Number: |
| User Address: |
Warranty Description
Please keep the warranty card and valid purchase proof properly, show it
together when sending the product to repair. If you can’t provide the warranty
card or relevant purchase certificate, the calculation date of the product
warranty will be based on the product manufacture date.
Warranty Regulations
-
If you have any questions during using, please don’t hesitate to call 4008894883 for help.
-
WithIn one year from the purchase date, if the product with quality issue and the technical staff of our company has confirmed that the issue occurs under normal use, we will provide free replacement services.
-
In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
A. The product main part has been damaged due to incorrect operation, negligent use or Irresistible reasons
B. The product has been dismantled or repaired without our company authorization
C. The headphone driver unit has been used at high volume, and the diaphragm Is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
D. The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period. -
The free service provided by this warranty card does not include product accessories, and other decorations, gift, etc.
Product Qualification Certificate
After inspection, the productmeets the technical standards and is allowed to
leave the factory.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications expresslyapproved by the party.Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting tocomputer or peripheral devices).This equipment complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. R
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
IC Warning
This device complies with Part 15 of the FCC Rules [and contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).