BLXBuds True Wireless Bluetooth Earbuds User Manual
- June 6, 2024
- BLX
Table of Contents
BLX Buds True Wireless Bluetooth Earbuds User Manual
BLXBuds True Wireless Bluetooth Earbuds User Manual
Thank You For Choosing BLXBuds
Listen to music and take calls without getting tied up in a bunch of wires.
BLXBuds are true wireless earbuds that use Bluetooth 5.1 to seamlessly connect with your phone or other compatible devices. Enjoy hours of music, hands-free calls, and crystal-clear audio thanks to BLXBuds’ advanced audio engineering.
Kindly read this user manual before using your new wireless earbuds. Make sure to keep this document for future reference.
BLUETOOTH 5.1
PRODUCT SPECIFICATION
Wireless Stereo Earbuds
- Bluetooth® Connection Name: BLXBuds
- Bluetooth® Version: 5.1
- Size: 2.9 x 1.4 x 1.3 inches (75.3 x 35.3 x 33.5 mm)
- Weight: 44.5g (Earbuds and charging case)
- Earbuds Input: DC 3.7V 40mA
- Charging Case: Input: DC 5V 300mA Output: DC 5V 100mA
- Working Time: 4.5 hours
- Earbuds Battery Capacity: 40mAh
- Charging Case Battery Capacity: 300 mAh
- Sensitivity: 101.8±3Db
- Frequency Response Range: 20 – 20,000 Hz
- Impedance: 32 Q
- Water Resistance Rating: IPX4
QUICK USER GUIDE
-
Take the BLXBuds out of the charging case. The indicators will blink Red and Blue until your BLXBuds are paired with your device.
-
To pair, open your phone’s Bluetooth settings. Look for BLXBuds and dick to pair your phone with the earbuds. Once they are connected, the lights will blink blue a few times then stop blinking.
Note: If the earbuds do not connect with your phone within 1 minute, they will power off. To fix this, put your earbuds back in their case to restart them. -
Once you’re done listening, put the BLXBuds back in the charging case. They will automatically turn off and start charging.
-
When you want to use your BLXBuds again, simply take them out of the case. They will automatically turn on and connect with your phone.
ONE BUTTON CONTROLS
CHARGING GUIDE
Earbuds
-
Steady red light- Charging
No light- Fully charged -
Charging time: About 1.5 hours
Charging Case
Blinking white lights- Charging
Steady White Lights- Fully charged
Charging Time: About 2 hours
WHAT’S INCLUDED
Earbuds
Charging Case
TROUBLESHOOTING
My phone cannot find the BLXBuds.
- Turn off your phone’s Bluetooth® connection. Turn it back on, then search for the BLXBuds again.
The earbuds were interrupted or disconnected during a call or while listening to music. This may be due to:
- Low battery
- The distance between the phone and BLXBuds exceeding 33 feet (10 meters).
- There are signal-blocking objects between the phone and the BLXBuds
Only one earbud is working.
- You may have activated single earphone mode. To fix this, while your BLXBuds are powered on, double click the right earbud’s function button to go into pairing mode. Then pair your BLXBuds to your device again.
- One earphone may have run out of battery. To fix this, put your earphones back in the case to charge them up before listening again.
GET IN TOUCH
Thank you for choosing BLXBuds!
Have questions about our products? You can contact our helpful customer service team by going to https://support.blxbuds.com or by scanning the QR code on the right. We’re always happy to help!
FCCID 2AX4F-30691
IC: 27073-30691
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
At the end of its service life, this product may not be disposed of in the normal household waste, but rather must be disposed of at a collection point for recycling electrical and electronic devices. The materials are recyclable according to their labelling. You make an important contribution to protecting our environment by reusing, recycling, or utilizing old devices in other ways. Please ask the municipal administration where the appropriate disposal facility is located.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC’s RI- radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FAQS
What if I can’t find the earbuds in my phone’s Bluetooth settings?
Make sure your phone supports Bluetooth 5.1. If it does, make sure to turn on Bluetooth and wait for a few seconds before trying again. If you still can’t find the BLXBuds, try turning on and off your phone’s Bluetooth.
Why does my phone say “Bluetooth pairing failed”?
Your earbuds and your phone might not be close enough to each other. Make sure that the earbuds are in pairing mode by pressing the power button for 2 seconds. Try moving closer to your phone and try again.
Why does my phone say “Bluetooth pairing limited”?
Your earbuds might be too far away from your phone. Try moving closer to your phone and try again.
Why do I hear static noise when I use BLXBuds?
The earbuds might be too far away from each other or too far away from your device. Make sure that they are within 10 meters of each other, and try moving them closer to your device or farther apart from each other. If you still hear static noise, turn off the earbuds and charge them for a few minutes before trying again. BLUETOOTH CONNECTION SETTINGS ON YOUR DEVICE: Open Settings > Connections > Bluetooth > Select BLXBuds from the list of available devices > Pair with BLXBuds > Enter passcode 0000 > Tap Pair > Done! BLUETOOTH 5.1 TECHNOLOGY IN BLXBUDSAfter connecting BLXBudsto your device, you can enjoy amazing wireless audio quality with BLXBudsthat is comparable to regular wired headphones! Here’s how it works… BLUETOOTH 5.1 uses two technologies to ensure high-quality audio transmission between devices: Qualcomm® aptX™ Low Latency and Qualcomm® aptX™ HD. Both technologies help reduce audio lag so that you can enjoy seamless music streaming without annoying delays or lip sync issues! Qualcomm® aptX™ Low Latency helps reduce audio lag by up to 75% compared to regular Bluetooth technology, while Qualcomm® aptX™ HD improves sound quality by up to 50% compared to regular Bluetooth technology! You can learn more about these technologies here: www.blxbudscase.com/technologyBLUETOOTH 5.1 TECHNOLOGY IN BLXBUDSAfter connecting BLXBudsto your device, you can enjoy amazing wireless audio quality with BLXBudsthat is comparable to regular wired headphones! Here’s how it works…BLUETOOTH 5.1 uses two technologies to ensure high-quality audio transmission between devices: Qualcomm® aptX™ Low Latency and Qualcomm® aptX™ HD. Both
Are BLX earbuds Apple compatible?
WIRELESS HEADPHONES FOR IPHONE, ANDROID, AND PC DEVICES – Pair your IOS, Android, or PC device to our Bluetooth earbuds with microphone in a snap without digging throughout countless menus.
How do you use BLX earbuds?
BLXBuds will pair with any iOS or Android device. Just open the case, and then select BLXBuds from your device’s Bluetooth settings. After your initial pairing, they will pair automatically with that device from then on.
Will any Bluetooth earbuds work with iPhone?
While these chips allow headphones to pair to your many Apple devices much easier, it’s unnecessary, and any Bluetooth headphones will work. While you don’t need to go wireless for an iPhone, it’s much easier as newer iPhones no longer have a headphone jack and require a dongle.
What are BLX earbuds?
BLXBuds are portable, easy to wear, have better sound quality, affordable, wireless, comfortable, and available on the official site. These earbuds come with amazing sound quality and sleep design. They can be taken anywhere and amazing Bluetooth capabilities are provided to the users. BLX Buds.
Are BLXBuds waterproof?
The device is waterproof due to the use of an authorized waterproofing compound. The earphones are resistant to water and sweat. As a result, the device is ideal for use in all weather conditions.
How do wireless earbuds connect to iPhone?
Pair your device with a Bluetooth accessory
On your device, go to Settings > Bluetooth and turn on Bluetooth. …
Place your accessory in discovery mode and wait for it to appear on your
device. …
To pair, tap your accessory name when it appears onscreen.
19-Nov-2021
Who is BLXBuds?
BLXBuds are wireless headphones designed for listening to music, watching movies, gaming, and other listening-related activities.
What is noise Cancelling in earbuds?
Active Noise Cancellation uses microphones and speakers to reduce background and surrounding noises. This is the most known type and has mostly been used in over-ear headphones. Technology has become so small and battery efficient now that it can be used in true wireless in-ear earphones.
Are BLX earbuds noise canceling?
BLXBuds are new high quality earbuds that guarantee a rich media experience for audiophiles. Great features and value for money. Great battery life performance, active noise cancellation so you can listen to music/podcast without any interruptions.
Are JBL earbuds good?
Overall, JBL makes feature-packed headphones that usually have a well- balanced sound as they tend to closely follow the Harman curve. However, their design and fit may not always be the most comfortable, and despite their price, they have a plasticky build that can feel a bit cheap.
Why is my Bluetooth not pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
VIDEO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>