CORN Fenix8 3G WiFi Tablet User Guide
- June 6, 2024
- CORN
Table of Contents
CORN Fenix8 3G WiFi Tablet
For more information
- Consult the quick guide in packing box
- Open tablet service and enjoy following service:
- Consult the manual
- Get help through various channel such as self-service, intelligent quest ioning and answering, manual service, question feedback. In addition, you can search stores, service network, and service policy.
- Open setting>About tablet> Law information, consult law information.
Tablet appearance
Card insertion guidance
Tips:
-
Pay attention to the direction of insert ing SIM & Micro SD card , as the picutre guidance
-
Please use the standard Micro -SIM card. Insertion of unqualified card may damage the SIM ca rd support.
Mobile network
- Start up the tablet through a long touch of power button.
- Follow screen tips and enter Home Screen.
Settings> Network & lnternet> Mobile network, open 3G date
Safety information
- Incompatible or unauthorized power supply, charger, and battery may cause fire, explosion, or other hazards.
- Only the accessories accepted by the manufacturers and matched with the type can be used. Only types of accessories may cause accident and violate the warranty and related national regulations. Please contact with authorized service center for recognized accessories.
- Please do not use high volume for long time to protect hearing.
- Please use the device at the temperature from -20°C -70°C. Too high or too low temperature may cause device failure.
- Do not expose the device or battery to high temperature place or heat releasing equipment, such as sunshine, heater, microwave oven, water heater, etc. Battery overheating may cause explosion.
- When charging the device, power socket should be equipped at places near device accessory.
- Please disconnect the charger with t he device, and unplug it when it charged well or uncharged.
- If the device is equipped with non-removable internal battery, do not replace the battery in case of battery or device damage. The battery can be only replaced by authorized service centers.
- This device, battery and other accessories should be disposed in accordance with local regulations instead of treating them as domestic garbage. Improper battery treatment may cause battery explosion.
Privacy protection
- Upgrading firmware and system with una uthorized third-party software may cause cellphone failure or person information leakage.
- Online upgrad ing and d ow n loa d ing of matched official software are recommended.
- Please backup you personal information before upgrading as your person information may be removed.
Safety standards
-
Content of harmful substance in this homogeneous material is below the limit of GB/T26572 standard.
-
The harmful substance content of t his homogeneous material at least exceed the limit of GB/T26572 standard. However, there is no better alternative at resent.
Thus, it meets the environmental protection requirement of EU RoHS. -
The number of this logo indicated that its normal EPUP is 20 years. Some accessories may also have the EPUP logo and the number in the logo prevails. This product may not include all t he accessories due to different types, and it should be subject to the actual configuration.
Name and content of harmful substance
Spare part|
harmful substance
Pb
| Hg| Cd| Cr(VI)| PBB|
PBED
Device|
X
| | | |
•
|
Charger|
X
| | | |
•
|
•
Earphone|
X
| | | |
•
|
Battery|
X
| | | |
•
|
Cable| | | | |
•
|
•
FCC Warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protectt:ion against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television recept ion, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Before a new model phone is available for sale to pub lic, it must be tested
and certified to the FCC that does not exceed the exposure limit established
by the FCC, Tests for each phone are performed in positions and locations(e.g.
at the ear and worn on the body} as required by the FCC.
For body worn operation, this model phone has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product or
when sued with an accessory that contains no metal and that positions the
handset a minimum of 1.0 cm from the body.
Non-compliance with the above restrictions may result in violations of RF
exposure guidelines.
Android is a trademark of Google LLC.