Huerich Photo Electronic Technology HR0001AR Wireless Quick Charger Instructions
- June 6, 2024
- Huerich Photo Electronic Technology
Table of Contents
Reference for Wireless Quick Charger instructions
Product Description:
Wireless Quick Charger is a wireless charging transmitter, compatible with WPC
QI-1.24 latest standards support A11 coils, supports the Huawei phone, the
Xiaomi phone, iPhone (model 12 and above), iPhone XR, tablet charging.
The internal integrated chip STI3470（Optional）,9240 QFN19L， SC5001.detects a
wireless receiver by Analog Detection receiver using an internal analog op-amp
and establishes communication with the receiver, then the power transmission
begins. 9240 QFN19L AND SC5001 decode the communication packets sent from the
receiver, then use the PID algorithm to change the oscillation frequency to
adjust the output power on the coil.
Terminate the power transmission once the battery on the receiver is charged.
The full-bridge drive circuit and full-bridge power MOS, voltage & current ASK
communication demodulation module are integrated.
Installation instructions：
- The utility model is put into the inner hole of the shell of the terminal machine, and the shell with one side of the indicator light is exposed.
- Lock the bracket and the product with screws.
- The bracket is then locked into the screws inside the terminal unit.
- Male and female plug-in DC power supply, wireless quick charge products can be used normally.
Product parameters:
Brand:
Model: HIP-D05AR-F1 , HIP-D10AR-F1
Enter : HIP-D05AR-F1 Input Voltage：5V 2A， HIP-D10AR-F1 Input Voltage：9V-15V 2A
Output : HIP-D05AR-F1 output：5W， HIP-D10AR-F1 output：10W
Operation frequency:110K-205K Hz
Max temperature: -20°C-+45°C.
The symbol indicates DC voltage，
H-field: / SAR value: /
LED status indication
Power on status : blue light Blinks once, The red light blinks again,
then the blue light is always on and goes into standby.
Standby Status: blue light is on and the red light is off.
Charging status: Red Light always-on, blue light off.
Full status: Red Light always-on, blue light off.
Foreign body, over-temperature, error: Blue Light, red light flashing at
the same time.
Product Size:
Installation instructions:
1、The device with wireless receiving function is placed in the receiving area;
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>