Shenzhen Guang Xin Yi Electronics G61 Car FM Transmitter User Manual
- June 6, 2024
- Shenzhen Guang Xin Yi Electronics
Table of Contents
Car FM Transmitter
Model: G61
User’s Manual
Instructions
First Use
- Insert the device into the car cigarette lighter, it will automatically turn on after power on and display the car battery voltage.
- Turn on the car stereo and put it in the FM radio state, select any blank FM frequency
- FM frequency adjustment is consistent with the frequency of the car radio.
Bluetooth Pairing
- After the device is turned on, it will automatically enter the Bluetooth pairing state.
- Turn on the mobile phone Bluetooth and search “G61” on your mobile device pairing list and connect it.
- Once paired, the FM transmitter will remember this pairing in the future and connect automatically.
Selecting a Free Frequency
Turn on the FM radio and select a free radio channel between
88.1-107.9MHz.
Long press the and Al keys to adjust the frequency.
Play Music in TF Card
- Insert the TF card into the FM transmitter TF card slot, the device will automatically recognize and play the music in MP3/WMA format.
- When playing TF card songs, short press the ® button to pause the music, press it again to resume playing. Presse the KandAl keys to track the previous or next song.
Make and Receive Calls
When a call comes in, short press the ® key to answer the call. Short press it
again to end the call, and long-press it to reject the call.
Convert the Colorful Rhythm Lights
Long press for 2 seconds, you can switch the light color, there are 8
different colors, such as red, green, blue, etc. You can switch or turn off
the light.
Product Parameters Bluetooth Version: V5.0
Working Voltage: 12V-24V Limit Voltage:
9-26V Type-C Output: 5V/3.1A
USB QC3.0 Output: 5V/3.4A, 9V/2.5A, 12V/2A
Sensitivity: -42dB +/-3dB
Frequency: 2.402-2.480GHz
Bluetooth Effective Distance: 10 meters RF
FM Frequency: 88.1-107 . 9 MHz
FM Effective Distance: 2-3 meters
Product Illustration
This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The devices have been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction.