Shenzhen Loyal Electronics M502 Wireless Vertical Mouse User Manual

M502
WIRELESS VERTICAL MOUSE

User Manual

product Function

US/UK/CA

Left Button
Right Button
Scroll Wheel
DPI Button
Desktop Button
DPI/Channel Indicator
Forward Button
Back Button| Charging Port
On/Off
Mode Switch Button
2.4G Indicator
Bluetooth 1 Indicator
Bluetooth 2 Indicator
USB Receiver
---|---

Note: Bluetooth indicator/USB indicator flashes quickly on low battery.

24G Connection

|
---|---
|

1. Turn on the mouse.
2. Take out the USB receiver.
3. Insert the USB receiver into the computer USB port.
4. Click the mode switch button to 2.4G mode then the first red LED will flash slowly.

Bluetooth Connection

Windows System(Take Windows 10 as an example)

1. Turn on the mouse.
2. Press the switch button to switch to the second channel, then the blue LED will flash slowly.
3. Long press the switch button for 3-5 seconds until the blue LED flashes quickly. The mouse will be in Bluetooth pairing mode.
4. Click the “Bluetooth devices” button on the computer.
5. Click the “Add or remove Bluetooth devices” button.

6. Search the Bluetooth “BT5.2 Mouse”, and click the Pairing button.
7. When the Bluetooth “BT5.2 Mouse” is connected, the mouse is ready to use.

Mac OS System
Please operate the Bluetooth installation steps(1-3) before pairing.
1. Click the “system preferences” button on the Mac.

2. Click the Bluetooth button on the system preference folder.

3. Search the Bluetooth “BT5.2 Mouse, and click the Pairing button. If installed completely, the mouse could be used normally.

Mode Switch

When 2.4G or Bluetooth conned successfully, shortly press the switch button at the bottom of the mouse, and you could switch the modes easily.

Package Include

lx Wireless Mouse
lx USB-C Cable
lx User Manual

Basic Parameters

MG Transmission Parameters
Transmission distance| 10m
Work voltage| 3.7V
Work currency| 8.0±0.5mA
Rate of return| 125Hz
Bluetooth Transmission Parameters
Transmission distance| 10m
Work voltage| 3.7V
Work currency| 6.0:0.5mA
Rate of return| 125Hz
System needs| Bluetooth receiver device
USB interface| Window® 8, Windows 10 or higher versions Mac OS X 10.10 or higher versions Android 4.3 or higher versions

FCC D

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Coned Disposal of This Product

(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and die < the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment .

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

C&E Connection E-Commerce(DE) GmbH Zum Linnegraben 20, 65933, Frankfurt am Main.
Germany Email: info@ce-connection.de
Phone: +49(069) 27246648 CET PRODUCT SERVICE LTD.
Chase Business Centre, 39-41 Chase Side.
London N14 SBP United Kingdom Email: info.cetserviceogmail.com
Phone: +447419325266

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>