BYTECH BY-PG-MC-204-BK 4 Feet Extendable Tripod User Guide
- June 6, 2024
- Bytech
Table of Contents
4 Feet Extendable Tripod
BY-PG-MC-204-BK
BYTECH
THE ART OF TECHNOLOGY
MODEL: BY-PG-MC-204-BK
FCC ID: 2AHN6-PGMC204
Included Items:
- 1x Tripod Stand
- 1x Remote Shutter
- 1x CR2032 battery (installed)
- 1x Instruction Manual
- Button 1: Shutter button for iOS devices
- Button 2: Shutter button for Android devices
Status Indicator:
Rapid blinking – Ready to pair. Slow blinking – successfully paired
Pairing instructions:
- Turn on the shutter by moving the on/off switch to the on position. The Status Indicator light will blink rapidly to indicate it is ready to pair.
- Activate Bluetooth functionality on your smartphone.
- Select “BY-MC-204” from the list of available devices. You will not need to pair the next time you turn on the remote shutter.
Shooting instructions:
- Open a camera application.
- Depress the button corresponding to your device to take a picture.
- Turn off the Remote Shutter when not in use to preserve the battery.
Specifications
- Bluetooth Version: 5.0
- Operating Range: 33 feet
- Battery: CR2032 (included)
- Battery Life: Approx. 6 months depending on usage
Installing the Battery:
Setting up the Tripod:
- Loosen the leg bolt by turning the screw counter clock-wise until! tension is relieved.
- Pull each leg outward push up on the leg support guide until The leg support guide is off The ground when the tripod is set down. If you are operating the tripod outside, set it higher to clear obstacles.
- Lock the legs by screwing the leg bolt clock-wise until the tension prevents leg movement.
- Place your smartphone horizontal onto the phone clamp against the soft non-slip surface, while pulling up on the pull tab. The spring-loaded pull Tab will hold your smartphone securely in place.
- Loosen The bolt and adjust The angle ball joint to The desired angle. A vertical position can be achieved by rotating the screw plate into the groove opposite the ball joint secure bolt.
- Adjust to the desired height using the height bolts. Be sure to tightly screw all the bolts adjusted to prevent undesired movement.
- A camera can be mounted on The screw plate by unscrewing and removing the phone clamp.
Caution:
In order to protect your smariphone, please keep the tripod on a smooth (if used inside) surface, and prevent external forces from tipping the tripod, which will be top heavy with your device attached.
Do not press down on the tripod while the bolts are locked, as this could break or deform the legs.
Battery Warnings:
- The batteries used with this product are small parts and should be kept away from small children who put things in their mouths. If a battery is swallowed, promptly see a doctor and have the doctor call Poison Control at 1-800-222-1222
- Only replace the battery with another CR2032 battery.
- Clean the battery contacts with a dry cloth prior to battery replacement.
- Ensure when replacing the battery that it is installed with the correct polarity upwards.
- To prevent damage to the device, remove the battery when the device is being stored or the battery is spent.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Bylech NY INC. warrants this product to be free from defects in materials and workmanship to the original purchaser for a period of 12 months from the original purchase date. Bytech’s responsibility with regard to this limited warranty shall be limited solely to repair or replacement as Its option, of any product which fails dining normal consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. At any time during the 12 month period following the purchase, the product fails due to defects In material or workmanship, retum the defective product (with freight prepaid) with proof of purchase. Please include $5.00 for return shipping and handling.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device most accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>