Wisoee JS2712A Digital Alarm Clock with FM Radio Instruction Manual

Wisoee JS2712A Digital Alarm Clock with FM Radio Instruction

DISPLAY DESCRIPTION

BUTTON DESCRIPTION

BACK COVER DESCRIPTION

FUNCTION

1. Dual Alarm Clock, FM Radio, Bluetooth Speaker
2. 6 buttons: MODE、SET、PREV/V-、PLAY、NEXT/V+. LIGHT/SN
3. 4-Digit time display: hour, minute; 12/24 hour format.
4. 3 brightness levels of display screen can be changed by pressing “LIGHT” button repeatedly (HI/LOW/OFF).
5. Press “MODE” button, the function menu order is TF (skip to the next function if there is no card) Bluetooth FM radio Clock.
6. Long battery life and power saving: built-in 2000mah lithium battery.
7. Sliding switch: turn on/off the display (on the back side).
8. Charging the clock via USB cable（The charger plug is not included in the package, it only come with a USB cable).

OPERATIONS

For the first use, it is recommended to fully charge the battery. When charging, the indicator light turns red to indicate that it is charging, and when charging, the indicator light turns blue to indicate it is fully charged.

1. Push the switch to on.
2. The product has a display and needs to be reset to the correct time.

CHARGING/BATTERY CAPACITY INDICATION

• When the battery level of the product is lower than 20%, a low battery indicator will appear on the display, please charge it.
• When the battery level of the product is lower than 10%, it only display time, and other functions can not work until connected to an external power source.

RESTORE THE FACTORY SETTING

If the product does not respond correctly during setting and display, can use the RESET button whose hole is same as the AUX hole to restart.

Time Setting

SETTING THE TIME

1. I n any mode(except FM mode), hold “SET” button, “12 Hr” or “24Hr ” appears on the display.
2. Use the – / + buttons to toggle between 12 and 24 hour mode.
3. Press “SET” button. The hour digit flashes on the display.
4. Use the – / + buttons to set the current hour (hold the – / + buttons for fast adjust).
5. Press “SET” button. The minute digit flashes on the display.
6. Use the – / + buttons to set the current minute (hold the – / + buttons for fast adjust).
7. After setting, hold “SET” button or if without press any button, it will also automatically save and exit the setting mode after 30 seconds.

Alarm Setting

1. In any mode (except FM mode), press “SET” button and select to display AL 1 or AL 2 time.
2. Under AL 1 setting mode, AL 1 icon will appear on the display. Hold “SET” button and the hour will flash, use – / + buttons to set the hour（hold the – / + buttons for fast adjust）.
3. Press “SET” button. The minutes will flash. Use – / + buttons to set the minutes(hold the – / + buttons for fast adjust).
4. Press“SET” button and “ON” or “OFF” will display, use – / + buttons to select alarm “ON” or “OFF”.
5. Press” SET” button and “bu” will appear on the display, use – / + buttons to select alarm sound “bu”(BEBE) or “ rd”(FM radio).
   6. After setting, hold “SET” button or if without press any button, it will also automatically save and exit the setting mode after 30 seconds.
   NOTE: For the setting steps of alarm 2, please refer to alarm 1.

During alarm clock ringing, there are now several options

• Press “LIGHT/SNOOZE” button The alarm sound will stop playing, after 10 minutes it will sound again(snooze icon will flash). This procedure can be repeated multiple times. During snooze interval without ringing
  (snooze icon is flashing), press

• “LIGHT/SNOOZE” button again, the snooze function will be turned off.

• The alarm symbol continues to remain visible on the display, and it will be woken at the same time on the next day.

• Wait 1 minute, The alarm sound stops automatically. The alarm symbol continues to remain visible on the display, and it will be woken at the same time on the next day.

• When the alarm sounds is BEBE, press any button except “LIGHT/SNOOZE” to stop ringing. If no button press, the alarm will automatically stop ringing after one minute.

• When alarm sound is radio sound, press any button except “LIGHT/SNOOZE” to stop ringing .If no button press, the alarm will automatically stop ringing after 30 minutes.

• Under AL1 or AL2 time display (“:” not blink), if no button press for 30 seconds , it will automatically return to time display (“:” keep blinking)

FM Setting

1. Under FM radio mode, press “PLAY” button to enter automatic channel selection and store radio stations.
2. Under FM radio mode, press “+” and “-” button to switch radio station, hold“+” and “-” button to adjust volume .
3. (Warm Tips : For the first use, please scan all the channel automatically , then it return back to the first channel and start to play. )

Bluetooth Function

1. Enter Bluetooth mode with a prompt tone and the Bluetooth icon will flash.
2. Activate the Bluetooth function on your mobile device to pair(Bluetooth name: BT SPEAKER).
3. Once there is a connection with a prompt tone, the Bluetooth icon will be solid.
4. Press “PREV / V-” button, it will automatically go to the previous song.
5. Press the “NEXT / V+ ” button to automatically go to the next song .
6. During music play, hold “+” and “-” buttons to adjust volume.
7. Press the “ PLAY” button to pause and repress to continue to play.

Warm tips: If a phone call is received with reporting the phone number, press “PLAY”button to answer the call, press again to hang up; Hold
“PLAY” button to reject the call. Double press “PLAY” quickly to call back.

Mp3 Function

1. Enter TF mode, or in any mode, insert TF card/U disk, it will enter TF mode, TF indicator light will be on, Bluetooth is disconnected, Bluetooth sound is turned off.
2. Pull out the TF card/U disk, it will automatically enter the Bluetooth mode.Without be paired, it will automatically exit Bluetooth mode to enter clock mode.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>