global sources XJY-LY-03 Bluetooth Speaker Instructions
- June 6, 2024
- global sources
Table of Contents
Bluetooth Speaker
Product specification
| Product name | Bluetooth Speaker |
|---|---|
| Model | XJY-LY-03 |
| Input voltage | 100-240VAC/50Hz-60Hz/0.3A |
| Connection method | Bluetooth 5.0 |
| Communication distance | 10m (barrier-free) |
| Speaker specification | 33mm 4Ω3W |
| Frequency response | 120Hz-18KHz |
| Signal noise ratio | ≥95DB |
| Operating temperature | -10º∼40° |
| Operating humidity | 35%∼85% |
| Housing material | PC |
| Supporting device | Android / IOS |
| --- | --- |
| Size | 45X45X42mm |
Connection method
Connection usage:
- Click the Bluetooth option in the mobile device icon, turn on the Bluetooth and open the detection button to search, the product model appears in the available devices.
- Click on the Bluetooth that starts with ‘Bluetooth Speaker in the available devices, the product model will appear in the paired device after successful connection.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements The device can be used in mobile exposure conditions, the use distance is 20cm. compliance with exposure requirements
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>