atune analog RT33 Bluetooth Headset User Manual

Model: RT33

User Manual

FCC ID: 2A2XD-RT33

“Congratulations on your purchase and Thank You for choosing the tune analog True Wireless Earphones. Please read the user guide carefully before using”.

CAUTION

1. When not in use for a long period of time please turn off the Earphones and store them carefully to avoid any damage.
2. In order to prolong the battery life, please charge every 6 months.
3. Please charge the Earphones first if they have been left unused for a long time.
4. The batteries in the Earphones and Charging case are original please do not attempt to change them yourself.
5. Please Keep the Earphones and Charge Case in a dry place.
6. Please Keep away from high heat sources to avoid battery blast accidents.
7. Do not play at high volumes for long periods at a time, to avoid potential hearing damage.
8. Do not use the Earphones in a dangerous place or whilst driving.

OVERVIEW

Box Contents:
RT33 Earphones 1 pair
USB Cable 1 pc
Ear Caps 2Pairs
Charging Case 1 pc

POWER ON

Mode 1

Open the charging case, The earphone indicator light flashes in blue light is on for 1 second the earphone will automatically turn on and enter into the pairing mode.

Mode 2

Press and hold the earphone’s touch key for 3 seconds, the blue indicator lights will turn on for 1 second, and the earphone automatically turns on.

POWER OFF

Mode 1

Put the earphones back in the charging case and close the case to turn them off.

Mode 2

If the earphones are not in the charging case, just press and hold the touch key of any earbud for 10 seconds to turn them off.

PAIRING

Put the left and right earphones into the charging case press the button 3 seconds in the charging case and the left and right earphones will pair automatically. (the red and blue lights alternately flash)
Turn on your mobile phone’s Bluetooth Search for “tune analog 12” and connect it. The earphones will be paired with your device and sound will be available through both channels.

TWS headphones| Master-Slave is not fixed, the Master-Slave will be automatically switched, and any earphone connected to the mobile phone is the master earphone.
---|---
Bluetooth music| Supports Bluetooth devices connection and supports dual-channel stereo high-fidelity music playback.
Binaural Call| Supports TWS binaural phone call.
Power indicator| Support IOS and some of the android mobile phone battery indicator

Charge the charging case if not using it for a long time or once every more than 3 months.

TOUCH CONTROL

1. Play/pause: One-click on the touch key on either earphone.
   Previous song: Double click on the left earphone touch key.
   Next song: Double click on the right earphone touch key.

2. Volume +: Long press the touch panel on the right earphone.
   Volume -: Long press the touch panel on the left earphone.

3. Answer the call: Click any earphones on the left or right.
   Hang up the call: Press the touch key on the left/right earphone for 2 seconds to hand up the call.
   Reject an incoming call: Press MFB Button on the left/right earphone for 2 seconds to reject a call.

4. Activate SIRI: Three clicks on any one of the earphones

RESET

Put the earphone into the charging case,long-press the button of the charging case for 10 seconds to clear the group pairing information, and restore factory settings.(The red light blinks for 3 seconds)

CHARGING COMPARTMENT INDICATOR

| The red light blinks slowly when the earphones’ battery is low.
---|---
| Put the earphone with a low battery into the charging case, and the indicator of the charging case flashes 6 seconds and then turns off.
| The charging case closes the cover to charge.

CHARGING THE EARPHONES

You can charge the case and then carry it with you as a portable charging device and storage for your earphones.

|
---|---
To charge the case plug the USB charging cable supplied into the| The indicator blinks when charging. 0% -30% red light charging port. flashing 30% -100% blue light flashing The fully charged blue light is steady on
|
When the charging case is full, pull out the charging cable.| When the charging case is fully charged the blue light is always on.

CHARGING THE CASE

Battery Removal/Disposal

Your product contains batteries that cannot be disposed of with normal household waste. Doing so may harm the environment from your local authority about separate collections for batteries because correct disposal helps to prevent damage to the environment and health. Should your product develop a fault and your battery needs replacing?

Environment Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Made in China

customerservice@ttinno.com
Any support you need, anything you feel like sharing, You are more than welcome to contact us.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>