dns WD-274A Wireless Charger User Manual
- June 6, 2024
- dns
Table of Contents
dns WD-274A Wireless Charger User Manual
Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD.
Address: 23/F Building A, Shenzhen International Innovation Center,
No.1006 Shennan Road, Futian, Shenzhen, China
Thanks for purchasing this fantastic Qi Wireless charger. Please read the manual in detail for proper operation before you get to start to use.
What is in the box
- Qi Wireless Charger x1pc
- User Manual x1pc
Product Introduction
- USB C Charging Port
- LED indicator
- Antiskid strip
Specification
Input: DC 9V/2.22A or DC 12V/1.67A
Output 1: 10W for magnetic wireless charging
Output 2: 2.5W or 5W for AirPods Charging efficiency: ≥70%
How to USE
Use a USB C cable（not included）plug into your wireless charger USB C female
port, and plug another connector of the cable into an AC adapter or PC USB
port to power your device.
Place Your Cellphone or tws charging case on the wireless charger. After you have connected the charger to a power source (either your computer or a wall outlet), all you need to charge is simply place on the top of the charger.
Before you try to charge your device with the charger, ensure your device is compatible with Qi charger and make sure that the device is well located at the charging area of wireless charger, please attention to charge your mobile phone at the top of wireless charger must have magnetic function.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>