dns WD-286B Magsafe Wireless Charger User Manual

June 5, 2024
dns

dns WD-286B Magsafe Wireless Charger

Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD.

Address: 23/F Building A, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian, Shenzhen, China
Imported by:xxxxxxxx,address:xxxxxxxxx,tel:xxxxxxxx
Thanks for purchasing this Wireless charger. Please read the manual in detail for proper operation before you get to start to use.

What is in the box

  1. Wireless Charger x1pc
  2. User Manual x1pc

Product Introduction

  1.  USB C connector input
  2.  LED indicator
  3.  Magsafe charging module for iPhone12/13 series
  4. Wireless charging pad for AirPods.

Specification

  • Main functions: Wireless charging for AirPods and Magsafe devices.
  • Products applicable: iPhone12/13series, AirPods.
  • Charging type: one-on-one charge corresponding area;
  • Standard version: WPC – 1.2.4;
  • The input voltage: PD 30W (DC 9V/3A, 12V/2.5A, 15V/2A)
  • Output: 15W for magsafe, 2.5W or 5W for AirPods.
  • Charging methods: induction model;
  • Working frequency:
    110 – 205KHz for Wireless charger; 350~375KHz for Magsafe.

How to USE

  1.  Connect Your Wireless Charger to the Power Source which with PD output.
  2.  Put the iPhone12/13series mobile phones to the magsafe.
  3. also the Airpods on TWS charging pad
  4.  Charging Status Indicator
Number Function LED behavior
1 Plug into charger Blue light on 3s for tws charging, 15W light off.
2 Idle mode, not charging but power on Light off
3 Charging device Blue light blink slowly for tws charging, 15W light off
4 Foreign object detection Light blink fast when tws charging
5 Fully charged Light on constantly when tws charging fully
6 Irregular protect Light blink fast when tws charging

Important Notification

To protect people from harm and property loss, we make a clear explanation on what you do should obey:

  1.  Warning! There are concerning the possibilities of death and severe wound: People who use heart-birth-maker should consult your doctor before you use this product;
    And please leave it at a distance of 22cm from the place where you install your heart-birth-maker, the electromagnetic wave have influence on heart- birth-maker’s work.

  2.  Attention! It may led to heat, fire and electric shock:

  •  Do not put it into water or any other liquid,Do not make it wet;
  •  Do not pull the AC adapter out with wet hands, ensure the safety and integrity of the adapter;
  •  Do not let the dust or other things accumulate on the product and the AC adapter;
  •  Do not use the product outside the temperature – 20 ℃ to 40 ℃;
  •  Do not charge in places where the sun shine directly or with high temperature;
  •  Do not use this product in places that are easy to fall, so as not to break;
  •  Do not lay the magnetic card,magnetic record media and precise machine too close to the protect;
  •  Do not decompose and remold;
  •  Do not lay anything between the non-connection charging pad and the charging machine;
  •  Do not surpass the rated value when using the plug and other wiring layout.;
  •  Do not make any breakage on the AC adapter,please make sure you connect the AC adapter fully and take the AC adapter off the plug when it’s not used ;
  •  Do not use travel converter;
  •  Please teach your children to use

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Hereby, SHENZHEN DNS INDUSTRIES CO., LTD. declares that the Radio equipment type is in compliance with Directive 2014/53/EU requirements, the full text of the declaration of conformity are available at the following internet address: https://www.dnschina.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals