Shenzhen Apeman Innovations Technology PF56 Automatic Pet Feeder User Guide

Shenzhen Apeman Innovations Technology PF56 Automatic Pet Feeder User

Guide

Product Structure

LED Indicator States

Power Indicator States /
Button operation| Meaning
---|---
In standby mode (no food output),
press the unlock button and the
manual feeding button at the same
time until the Wi-Fi indicator flashes.| The Wi-Fi reset, at this time
the device needs to be
reconnected with the app.
Wi-Fi light flashing.| Waiting for connection.
The fault light is red.| There is not enough food in
the food bucket. It will go out
automatically after adding food.
Long press the unlock key, and the
unlock light will turn green.| Unlocking status. It can b
fed by manual feeding button.

Warm Tips

1. When the Manual Feeding Button is clicked, the number of servings to be fed is determined by the number of servings during the scheduled feeding or the APP-controlled feeding. If the APP has never been operated, the default number of servings is 5.
2. In the unlocked state, the unlock indicator is on. One minute after unlocking, it will automatically enter the locked state, and then the unlocking light will go out

Automatic Feeder Installation

Open the battery compartment at the bottom of the feeder.

• Use the rechargeable battery to supply power: place the rechargeable battery in the “battery compartment”, and insert the connector of the rechargeable battery into the “battery port”.
• Use external power supply: insert the adapter power cord into the “adapter power interface”, wind the excess power cord to the “winding rack” as needed, and exit at the “outlet”.

Automatic feeder assembly
Tilt up the feeder (feeder base and feeder bucket), close the side with the “ears” of the feeding bowl to the gap of the feeder, put down the feeder, and press down on the feeding bowl.

Add food to the food bucket
Open the lid of the food bucket: press the button on the back of the food bucket, and at the same time lift the lid up. Loosen the button on the other side to remove the lid. After adding food, close the food pail in the reverse order of removing the food pail cover.

Remove and clean the food bucket
Remove the food bucket: rotate the food bucket counterclockwise and Lift it up;

Remove the food tray: turn the food bucket over, grab the food tray, rotate the food tray counterclockwise and extract it from the top.

Warm Tips:

1. The main body cannot be washed with water, which will damage the electronic Please clean it with dry hands and a soft cloth.
2. The food bowl can be washed with water

Quickly Setting Guide

Step 1. Download the Faroro App
Search “Faroro” at App Store/ Google Play or Scan the OR Code to download the App and create your account

Step2. Ensure the feeder is waiting to be paired
Long press the unlock button and the blanking button at the same time until the Wi-Fi indicator flashes. Need to successfully connect with the feeder during the Wi-Fi indicator flashing.

Step 3. WI-F1 Connection
(Two Wi-Fi Connection methods). Step 3. WI-F1 Connection

Connection method 1: Add Manually

1. Select Add Device then select “Wi-Fi Pet Feeder”.
   

2. Select the 2.4G Wi-Fi network.
   

Warm Tips
The feeder is 2. 4G Wi-Fi only, if your Wi-Fi is 5G, please set it to be 2.4G

If your router supports both the 2. 4G and 5G bands, but only one Wi-Fi name is displayed on the Wi-Fi search page of your mobile phone, perform these steps. How to set up 2. 4G and 5G Wi-fi names?

• Go to the Wireless page of the router. (The entry address is usually provided on the label attached to the bock of the router).
• Go to the 2. 4G setting page, and set the Wi-Fi name (SSID)to xxx-2.4G, where xxx indicates the Wi-Fi name. Save setting.
• Go to the 5G setting page, and set the Wi-Fi name (SSID)to XXX-5G, where xxx indicates the name. Save setting.

When the preceding settings are complete, the new Wi-Fi names will appear on the Wi-Fi set tings page of your mobile phone.

Note
After the Wi-Fi names are changed, you need to reconnect the devices that use this wireless router. The password remains the same if it has not been changed

• Select EZ Mode and ensure that the Wi-Fi indicator is blue and flashing. rapidly then select “Next”
• Wait for the connection.
  

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>