VILINICE SD04 39-Inch Soundbar User Manual

39-Inch Soundbar SD04

User Manual

Scan this QR code to acth1ate the 24-monlh warranty

or visit

vilinicelife.com/warranty

to know more

We hope you never have the need, but if you do, please do not hesitate to contact us! Our service is friendly and hassle-free.

1. Introduction

1.1 Acknowledgment

Thank you for choosing the soundbar by our company. Please read the user instructions carefully before using this product

1.2 Attentions

• Please keep the equipment dry.
• Do not expose the equipment to water and vapor.
• Do not expose the equipment to strong impact or vibration. so as not to cause equipment tenure.
• Do not place this equipment in an area where the temperature is too high or too low, otherwise it may cause equipment failure.
• Do not touch chemicals such as benzene and thinner.
• Please keep away horn strong magnetic field and electric field.
• Please avoid direct light or healing equipment.
• Do not listen at a high volume, so as to avoid adverse elects on listening
• Please do not disassemble, repair or modify the equipment by yourself. If you have any questions, please contact the after-sales service personnel.

1.3 Safety Instructions

Before using the product, please read the information In this section and let your children know the information. For more detailed Information, please refer to safely instructions and precautions.

• Do not block any ventilation holes.
• Do not approach any products That generate heat, such as radiators, stoves or other equipment.
• Prevent the power cord from being walked on or pinched, especially at plugs, power sockets, and equipment power outlets.
• Please unplug the power plug of this product during thunderstorms Of when it is not used for a long time.
• Do not disassemble the product and accessories without authorization. Only authorized organize. hone can repair the product.
• Please keep the product away from magnetic equipment, the radiation of the product will erase the information stored on the magnetic equipment.
•  Do not place any dangerous sources (such as liquids, lighted candles) on the machine.
• Keep the accessories of the product out of the reach of children, and do not allow children to use the product without supervision.
• When using this product, please abide by relevant laws and regulations, and respect the privacy and legal rights of others.
• Please strictly follow the relevant instructions in this manual when using the external adapter, otherwise your product may be damaged.

2. Equipment Information’s

2.1 Equipment Packaging List

The following items are included in the box of your equipment.

• Soundbar 1
• Adapter 1
• 3.5rm audio cable’
• RCA Audio cable ‘1
• Optical cable’1
• User manual

2.2 Energize Equipment
Before using the machine, connect the external adapter with the DC Interface of the device, and then plug it into the AC socket ‘Be sure to connect the equipment with adapters distributed randomly. Adapters with mismatched specifications may bum out One equipment. Please select the charging adapter in strict accordance with the product specifications.

3. Product Specification

3.1 Audio key function/interface Function Description

3.2 Remote control function description

1. Press the power on button to switch on and oil the device.
2. Press the treble plus minus button to adjust the treble volume separately.
3. The total volume plus or minus button can control the yawl* of the device.
4.  Up and down switch key to control the playing track.
5. Pause mute button, press this button to control the device pause or mute.
6. Sound field mode key, press this key to switch different sound field modes.
7. Bass volume control key, press this key to control bass volume independently.
8. Mode key, press this key to switch different sound source input.

3.3 Turn On and Off
Power on: Press and hold the key for 2 seconds to power on the equipment,

Shutdown: Press and hold the key for 2 seconds to shut down the equipment.

3.4 Violins Adjustment
Vol + : Press the – key briefly to increase the volume of the device.

Vol – : Press the + key briefly to reduce the volume of the device.

3.5 Bluetooth Play
3.5.1 Bluetooth connection

1. Switch the audio to Bluetooth mode (short press key to switch modes). Soundbar shows tbyl on the display.
2. Turn on the Bluetooth device (mobile phone, tablet, etc.), search for the audio pairing name “SD04” , cikk the pairing name to pair, and show that the connection is successful.
3. Long press the key to disconnect and reconnect Bluetooth.

Note: The soundbar cannot connect more than one Bluetooth device at the same time-please make sure there are no other active Bluetooth devises within range. Before starting to play via Bluetooth, oloase lower the volume to a normal level.

3.5.2 Music playing

1. Click the key to play or pause music.
2. Press – briefly to switch to the next song, and press + briefly to switch to he previous song.

3.6 Disk Play
Under normal use mode, you can automatically switch to Me USB flash drive playing function by directly inserting the USB flash drive.

Note: Some models need to manually press the key to switch to the USB flash drive mode to play. If it does not play, please check whether there are MP3 media files in the USB hash drive. The file system format of the USB flash drive Is FAT32, and the system format other than FAT32 is not supported for the area being. The USB flash drive supports up to 32G .

3.7 AUX In

AUX input with 3.6 and RCA input < some models only have one input

1. Plug the AUX,_3.5 audio cable into the device, and press the dl key to switch to AUX_3.5 mode to play. Soundbar shows [AUX 11 on the display, like picture below.

2. Plug the AUX_RCA audio cable into the device, and press the 6 key to switch to AUX_RCA mode to play. Soundbar shows [AUX 21 on the display ,like picture below.

3.8 COAXIAL In
COAXIAL input is digital signal input, transmission equipment must have digital signal output, and its interface adopts coaxial cable with impedance of 7511 as transmission medium. Because of constant impedance and wide transmission frequency band, it has better performance on sound quality.

• Plug the device into the digital signal line at COAXIAL, and press the key to switch to COAXIAL mode to play. Soundbar shows [GOA) on the display.

3.9 Optical In
The principle of OPTICAL input is similar to that of COAXIAL input. except that the transmission carrier is different. and its interlace Lases glass or plastic fiber as the transmission medium.

• Plug in the OPTICAL digital signal line and press the key to switch to the OPTICAL mode to play. Soundbar shows [OPT] on the display.

3.10 HDARI ARC
HOW supports multiple modes and protocols. at present, our products only support ARC mode. ARC is called Audio Return Channel, which means audio return channel. Its function is to transmit sound signals.

• Plug the device into the 1-1DMi ACR signal line and press the key to switch to HMI ARC mode to play. Soundbar shows [‘ARC] on the display.

3.11 Bass Output
External bass output interface, which can be used by external active subwoofer.

4. Connect with TV

4.1 Connect with TV
Firstly connect cable property . Press soundbar’s key to switch right mode . Then setting your TV to right digital audio output Some brand TV maybe different in digital audio output setting ,please check your TV’s manual. Some TV do not have output function, only Input ,then audio cannot be connected .

5. Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>