Saramonic SR-MV2000W Wired/Wireless Dual-Function Microphone User Manual
- June 6, 2024
- Saramonic
Table of Contents
Wired/Wireless Dual-Function Microphone
SR-MV2000W
User Manual
**Product Structure**
**TX**① Headphone volume control
② Gain/mute control
③ Type-C port
④ 3.5mm headphone jack| ⑤ Locking knob
⑥ Smart LED indicator
⑦ Battery level indicator
⑧ Power/pair button
⑨ Mic stand
---|---
Accessories
Functions
1. Magnetic Base
It can be mounted to a boom arm (not included)
Angle Adjustment
Battery Charging
| Indicator | Status |
|---|---|
| Charging (breathing white light) | |
| Full charged | |
| Current battery level (75% power) | |
| Low battery (25% power) |
Operation Guide
A – Wired Operation
1. Connect the microphone to your smartphone/computer
| Devices | Smartphone | Computer |
|---|---|---|
| Connection | Type-C to Type-C cable; Type-C | |
| to Lightning cable (not included) | USB-A to |
Type-C cable
System Requirements| Andriod/iOS devices| Windows 7/10
Mac OS 10.12 or later
Note:
1. SR-MV2000W is also compatible with iOS devices. The Type-C to Lightning
adapter cable is not included. Please purchase it separately if needed.
2. For optimum sound, please press and hold the volume control and gain
control knobs simultaneously to restore the factory setting. The indicator
will turn red and blink three times.
2. Adjust the knobs according to your needs
| Direct/Playback Monitoring| Gain/Mute Control
---|---|---
Control Button| |
Smart LED Indicator Color| |
Operating| Press the button to switch between direct and playback monitoring; Turn the knob to adjust the headphone volume.| Press the button to mute/unmute the microphone; Turn the knob to adjust gains for microphone input level.
B – Wireless Operation
1. Turn on the transmitter
Note: When using the wired function, short press the power button to
enable the wireless function simultaneously.
Press and hold the power button
3. TX & RX Pairing TX
| Status | Indicator light color |
|---|---|
| Unpaired | green light flashes in cycle |
| Pairing | green light flashes rapidly |
| Paired Successfully | solid green light |
2. Connect the
receiver to an external device
①. Connect to a Type-C device
②. Connect to a USB-A device
RX
Press + and – buttons simultaneously to enter pairing mode, TX and RX will be successfully paired within 10s.
| Status | Indicator light color |
|---|---|
| Unpaired | green light flashes in cycle |
| Pairing | green light flashes rapidly |
| Paired Successfully | solid green light |
Specifications
Wired Operation
| Mic Capsule | 14mm Electret Condenser Capsule |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz-20kHz |
| Sensitivity | -36dB (0dB=1V/Pa, 1kHz1Pa) |
| Signal-to-Noise Ratio | 80dB |
| Maximum SPL | 120dB |
| Sampling Rate | 48kHz |
| Bit Rate | 16bit/24bit |
| Mic Gain | 0~54dB |
| Working Voltage | 5V110mA |
| Audio Output Connector | 3.5mm Headphone Jack, Type-C Port |
| Operating Temperature | 0°Cto50°C |
| Storage Temperature | –20°Cto+55°C |
Wireless Operation
| Mic Capsule | 14mm Electret Condenser Capsule |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 35Hz-18kHz |
| Sensitivity | -36dB (0dB=1V/Pa, 1kHz1Pa) |
| Signal-to-Noise Ratio | 80dB |
| Maximum SPL | 120dB |
| Transmission Type | 2.4GHz |
| Modulation | GFSK |
| Antenna | Dipole Antenna |
| Operating Range | 60m (Outdoors without obstacles) |
| Distortion | <0.05% |
| Battery Life | 6 hours |
| Charging Time | 1.5 hours |
| Battery Capacity | 850mAh |
| Dimensions | TX: 165×78.6×90mm |
RX: 71.6×27.1×10.55mm
Weight| TX: 359g
RX: 12.5g
Packing List
- SR-MV2000W Microphone×1
- Wireless Receiver×1
- Type-C Female to USB-A Male Adapter×1
- 3/8’’ to 5/8’’ Screw Adapter×1
- 6.6’(2m) USB-A to Type-C Cable×1
- 6.6’(2m) Type-C to Type-C Cable×1
Polar Pattern Frequency Response
For a better recording experience, the application SmartRecorder is recommended.
Scan the QR code and follow us！
Shenzhen Jiayz Photo Industrial., Ltd
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley
Power, Guanlan, Longhua District, Shenzhen, China
400-613-1096
www.saramonic.com
info@saramonic.com
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>