Shenzhen Dream Made Business Trade PB-01 3D Loop Heating Stockings User Guide
- June 6, 2024
- Shenzhen Dream Made Business Trade
Table of Contents
Dream Made
Business Trade PB-01
3D Loop Heating Stockings
User Guide
Packing List
| | | |
---|---|---|---|---
000MAH 1pair| 5000MAH 1pair| Double ended I caole1(TYPE-C)| Sock Washing
Bage 1| Instruction *1
Product Manuals
Product Parameters
Rated voltage:5V
Charging time:34H
Weight (G):500-550
Packing box size (IN) :4.334.724.96| Rated power:5W
Full charge usage time: 3-8H
Single battery capacity:5000rrAh
---|---
Socks materia1:2016acrylic. 1096PBT, 15%Nyion, 15%Nyion, 2096Imitation mink, 20%spandex.
SIZE
SIZE
| Suggest size| Socks Length(IN )
---|---|---
US| EU| UK| CN| Length of stockings| Socks width|
Socks Length
L
| 6.| 35-43| 4-8| 25-40| 12.2-12.6| 6.9-7.3| 3.
XL| 9-14| 43-53| 8-13| 40-53| 13,4-13.8| 7.9-8.3|
Washing instructions:
- The water temperature should not exceed 122°F
- Be sure to remove the battery before washing, and insert the battery cable into the battery pocket (kindly note that the battery can not be washed).
- Socks can be put in a laundry bag and washed by the washing machine, hand washing is recommended.
- It should be dry by the sun Or airing, it can t be used by Dehydrated with a washing machine & dryer & iron.
Battery Cautions:
- Do not be close to high-temperature inflammable and explosive objects.
- Don’t slam it, and pls don’t disassemble & restructure.
- If the battery is not used for a long time recommend charging the battery and activate every 60 days.
- To avoid skin discomfort, pls don’t use super temperature for a long time.
- To keep the battery in a good state, pls store them in a dry and cool environment.
- To prevent Cryogenic burns (The Body feeling becomes dull under a low-temperature environment, due to everyone’s constitution being different, the slight burning sensation may have exceeded the temperature endured by the skin. It is recommended that to keep body feel warm or do not feel cold is fine, if you feel slight burning please timely lower the temperature)
Instructions for battery control:
- Check the battery capacity for socks, charge t to full power.
- Separate the left and right socks and keep the battery pocket on the outside of the calf.
- The battery can only be started when the socks are connected. Press the button to show the remaining battery power.
- Connect the Type-C power lead in the sock pocket to the power supply, plug, and fix it tightly. After connecting successfully, the display indicator(Gree.none) of the power supply will be light on. Under the condition of no load, the indicator will automatically go off after 5 seconds.
- Battery button: Long Press 5s to turn on/off the Battery; Long Press 2s-5s for superheating. Short press to switch 6 Levels Temperature Settings.
- To avoid burns, the supper heat gear can’t be used for a long time. After opening 1 min, the supper heat gear will exit automatically and restore to the last gear.
Battery button function description
| Indicator status | Current gear | Reference temperature ( T ) |
|---|
Light of light on Flashing
| 6| 140° F
| 5| 131° F
| 4| 122°F
| 3| 113°F
| 2| 104°F
| 1| 95°F
| Strong heat gear| 167°F
APP temperature control description:
- Scan the QR code on the back page tc coy. nloac the Bluetooth temperature control APP °WARN/1U
- When you connect the batteries to Socks, the Bluetooth APP function is but if you pull out the batteries, Bluetooth is disconnected and APP cannot connect to the battery control.
- In order to start the Bluetooth function, you need to enable the phone’s location and Bluetooth function first.
- Initializing the connection and open the binding page, the App will automatically searches for batteries connections to use.
- If you want to switch the batteries of more than 2 pairs of socks, please unplug the batteries after connected to Bluetooth and then try another socks’ This is provided to avoid multiple Bluetooth signals appear at the same time.
- After the battery is connected to the socks, APP will resume the state of the last connection, and the initial device will automatically connect the battery with Bluetooth enabled.
- It is recommended that each pair of socks battery is commonly used to fix mobile phone pairing without untying and reconnecting, which is convenient for use.
Shenzhen JunYi E-commerce Co.,Ltd
Address: 6F, D Building, Jlnbolong Industrial
Park, Longhua District, Shenzhen City.
UK REP resentative of Controller:
HUA TENG LIMITED
Address: 3 Glass Street, Hanley, Stoke On Trent, ST1 2ET, United Kingdom
EU REP resentative of Controller:
AC WORKS CONSULTING SRL
Address:Via Vilfredo Pa reto 125,47521, Cesena (FC) -ITALY Email:
acworksltd@outlook.com
Contact person: Giancarlo Galeota
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.