Saramonic UwMic9S Mini UHF Wireless Microphone System User Manual

Saramonic UwMic9S Mini UHF Wireless Microphone System User Manual

Statement

Please read this manual carefully before use and operate and store in strict accordance with the instructions provided. Please retain for future reference. For any issues that cannot be resolved with the user manual, please refer to your retailer for help or contact us at: info@saramonic.com.

Cautions

1. Take care not to use the unit underwater or unprotected in rainy conditions. Store in a cool, dry place.
2. Designed for use and storage at normal temperatures. Do not move the unit from overheated to cold conditions frequently, and keep away from heat sources such as heaters and ovens.
3. When in use, or when storing, avoid contact with dust and moisture.
4. Do not subject to device to violent collisions, as this can damage the device.
5. In order to avoid acoustic feedback, do not hold the microphone close to loudspeakers.
6. For optimal sound detection, do not hold your hand against the microphone head.

General Introduction

The Saramonic UwMic9S Mini wireless microphone system provides a premium 2-person wireless audio solution for Broadcast & TV, ENG, filmmakers, vloggers, mobile journalists and content creators. It is an easy-to-use, high- quality and flexible UHF system. The system can be powered through its USB-C ports, allowing it to run for numerous hours on a USB-C SV power bank.

UwMic9S RX Mini Portable Receiver
Introduction

The Saramonic UwMic9S RX Mini is a camera mountable dual-channel UHF wireless receiver. It features wide switching RF bandwidth, a high-contrast OLED display and infrared synchronization between transmitter and receiver. The two detachable antennas can be rotated 360° for better reception. The receiver’s output can be toggled between mono and stereo modes.

Product Structure

1. Detachable antennas

2. 3.5mm headphone output
   Connect headphones to monitor the audio.

3. Output jack
   Connect the RX to a video camera, camcorder, mixer or amplifier with the supplied output cables.

4. RF-A indicator
   The RF indicator displays the RF input level of group A as follows: Solid Blue: Successfully matched.
   Lights off: RF signal is disconnected.

5. IR/POWER indicator
   Indicates the battery level as follows:
   Solid blue: Sufficient battery level.
   Solid Red: Battery low.
   Charging Status:
   Flashing Red: Charging.
   Solid Blue: Fully charged.

6. RF-8 indicator
   The RF indicator displays the RF input level of group Bas follows:
   Solid Blue: Successfully matched.
   Lights off: RF signal is disconnected.

7. OLED display
   Display menus, please refer to “OLED Display
   Operation Guide” (page 4) for more details.

8. Power button
   Long Press to turn the RX Mini on or off.

9. SET button
   Long press the SET button to change setting on the display menu.
   Then, short press the SET button to confirm your setting change, or long press again to exit without saving.

10. + or – button
    Selects functions or values shown on the display.

11. Cold shoe mount adapter

12. USB-C charging port (DC SV)
    

Attaching Accessories

Connect the supplied cable to the output jack.

1. Choose the corresponding cable and plug into the OUTPUT jack.
2. For a secure connection, turn to lock the connector.

It is possible to attach a belt clip. Please Refer to “Attaching Accessories” (page 7).

Attaching the shoe mount adapter.

1. Please attach the belt clip upside-down before attaching the shoe mount adapter.
2. Press the bottom of the belt clip to make some space between the belt clip and the receiver.
3. Align the belt clip with the two vertical grooves on the shoe mount adapter and insert the adapter in the direction of the arrow.
4. Push the shoe mount adapter in fully until the belt clip fits into the horizontal groove on the adapter’s holder.

OLED Display Operation Guide

Home screen: If no operation is performed for 20 seconds on the other screens, the display will automatically return to the home screen.

1. Group icon
   (A) Indicates the power of group A is turned off.
   (A) Indicates the power of group A is turned on.

2. RF level indicator
   Indicates the current reception level.

3. Battery level indicator
   Displays the battery level. Please charge the devices immediately as soon as the indicator starts flashing.

4. Name of the channel group

5. Current channel
   Displays the current channel number.

6. Audio input level meter
   Displays the audio input level.

Power key: Long press the SET button to unlock or lock the power key. Lock the power key to prevent the receiver being turned off
accidentally while in use.

• Unlocked: Long press the power key to turn the receiver on or off (System default).
• Locked: The receiver will not be turned off even after the power  key is pressed.

Output mode: The output mode can be set to mono or stereo. When the output mode is in mono, the audio from the left and right channel
will be mixed. When in stereo, channel A’s and channel B’s audio output will be separated to the left and right of the stereo output.

Channel ON/OFF setting: You can turn the channel A/Bon/off according to your needs.

Select channel: For details of operation, please refer to “Manually setting the receiver channel” (page 10).

Set output volume: Set the volume of output audio within the range of Oto 15. The setting is retained even after the power is turned off.
Default volume is 13.

Auto scan function: Automatically scan an available and clear channel. For details of operation, please renter to “Using the auto scan function” (page 9).

Infrared matching function: Match the receiver and transmitter via infrared. For details of operation, please refer to “Matching the receiver and transmitter channel” (page 10).

Body-pack Transmitter UwMic9S TX Mini

Introduction

The Saramonic UwMic9S TX Mini is a compact body-pack wireless transmitter. It features an easy-to-read OLED display, a detachable antenna and mute function. With a line/mic input jack, it can accept audio from the included 3.5mm locking Lavalier mic or other line-level devices. In addition, the locking function prevents the transmitter from being turned off accidentally.

Product Structure

1. CD Detachable antenna

2. LINE IN /MIC IN jack
   3.5mm line in/mic in locking jack.
   Connect to a 3.5mm microphone or line-level devices.

3. AUDIO indicator/ IR (infrared detector)
   AUDIO indicator: Indicates the audio input level. IR (infrared detector): Receives the frequency from the receiver.
   Solid Blue: Audio input level is appropriate.
   Flashing Red: Audio is muted. For details on setting the mute function, please refer to “Set Mute key” (page 8).

4. POWER indicator
   Indicates the battery level as follows: Solid
   Blue: Sufficient battery level.
   Solid Red: Low battery.
   Charging Status:
   Flashing Red: Charging.
   Solid Blue: Fully charged.

5. OLED display
   For display menus, please refer to the “OLED Display Operation Guide” (page 8) for more details.

6. Power/ Mute button
   Power ON:
   Press button for one second or longer
   Power OFF:
   Press button until it turns off
   Mute ON/OFF:
   Short press button

7. SET button
   Long press the SET button to enter the displayed menu. Then, short press the SET button to confirm your option or long press
   again to exit without saving.

8. + or – button
   Selects functions or values shown on the display.

9. USB-C charging port (DC SV)

Attaching Accessories

1. Attaching a belt clip
   Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side.

2. Connecting the microphone
   For a secure connection, turn to lock the connector.

Note: Please turn off the transmitter before attaching or removing the microphone.

OLED Display Operation Guide

Operation Guide

Specification

Receiver UwMic9S RX Mini

Transmitter UwMic9S TX Mini

List of contents

UwMic9S Kit1 Mini (TX Mini + RX Mini)

1 x Body-pack Transmitter: UwMic9S TX Mini
1 x Portable Receiver: UwMic9S RX Mini
1 x DK3A Omnidirectional Lavalier Microphone
1 x locking 3.5mm TRS Male to XLR Male Audio Cable (0.5m)
1 x locking 3.5mm TRS to 3.5mm Right-Angle
TRS Audio Cable for Camera (0.3m)
2 x Type-C to USB-A Charging Cable (1.2m)
1 x Mic Clip
1 x Foam Windscreen
1 x Fur Windshield
3 x Antenna
2 x Belt Clip
1 x Cold Shoe Mount Adapter
1 xSR-C6 Toolbox

UwMic9S Kit2 Mini (TX Mini+ TX Mini + RX Mini)

2 x Body-pack Transmitter: UwMic9S TX Mini
1 x Portable Receiver: UwMic9S RX Mini
2 x DK3A Omnidirectional Lavalier Microphone
1 x locking 3.5mm TRS Male to XLR Male Audio Cable (0.5ml
1 x locking 3,5mm TRS to 3.5mm Right-Angle
TRS Audio Cable for Camera (0.3m)
3 x Type-C to USB-A Charging Cable (1.2m)
2 x Mic Clip
2 x Foam Windscreen
2 x Fur Windshield
4 x Antenna
3 x Belt Clip
1 x Cold Shoe Mount Adapter
1 x SR-CB Toolbox

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

http://weixin.qq.com/r/ikk1LQXEelgFrUFO9xyY

Scan the QR code and follow us!

Shenzhen Jiayz Photo Industrial., Ltd

A16 Building, Intelligent Terminal Industrial Park of Silicon Valley
Power, Guanlan, Longhua District, Shenzhen, China

400-613-1096
www.saramonic.com
info@saramonic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>