SUNCO LIGHTING 150W UFO High Bay LED Fixture with Accessory Socket Instruction Manual
- June 4, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING 150W UFO High Bay LED Fixture with Accessory Socket
COMPONENTS
EASY INSTALLATION
- Turn off power at circuit breaker before installing
- Drill pilot hole in ceiling and install chain or ceiling hook (not included) for adequate support.
- Attach provided lifting hook by turning clockwise into UFO fixture. Tighten screw to lock into place.
- Use lifting hook to hang fixture onto ceiling
- Secure light with safety cables (not included) to prevent it from falling.
- Use screw to lock lifting hook in place
- Use wire nuts to connect supply wires to fixture wires.
- Black to Black
- White to White
- Ground to Ground
- Turn on circuit breaker and test light.
WARNING
- To reduce the risk of fire, electric shock, or physical injury:
- This product should be installed by a person familiar with the construction and operation of the product and the hazards involved.
- Abide by related regional and local laws or regulations.
- Check for shipping damage prior to install. If the product is damaged, do not use it.
- Always turn off power to the switch and circuit breaker before installing a new light fixture.
- Proper grounding is required to ensure safety. Do not install this fixture in the rain.
- If you experience smoke or fire in the wires or lamps during or after installation, turn off the power immediately and notify relevant personnel.
- Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
- Use safety precautions. Safety eyeglasses and gloves are recommended.
SPECIFICATIONS
Documents / Resources
|
SUNCO LIGHTING 150W UFO High Bay LED Fixture with Accessory
Socket
[pdf] Instruction Manual
150W UFO High Bay LED Fixture with Accessory Socket, High Bay LED Fixture with
Accessory Socket, High Bay LED Fixture
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>