Soundynamic Twinkle Bluetooth Speaker with Pulsing Light User Manual
- June 6, 2024
- Soundynamic
Table of Contents
BLUETOOTH SPEAKER WITH PULSING LIGHT
USER’S MANUAL
MODEL: Twinkle
VERSION: V-01
Introduction
Thank you for choosing the Twinkle Bluetooth speaker. This product supports
smartphones, tablets, laptops, and other Bluetooth-enabled devices.
This product is tested to be IPX7 waterproof and dust-proof. It can work under
0.15-1 meter underwater for 30 minutes. and it is not affected by water
splashes or rain in a limited time. Please note the Bluetooth speaker is not
waterproof when the silicone cover is opened. Please ensure that the silicone
cover is closed under wet and splashing conditions.
Description
- Bluetooth Button
- TWS Button
- Light Mode Button
- LED Indicating Light
- Power ON/OFF Button
- Volume Down-/ Previous Track Button
- Volume UP+/ Next Track Button
- Type-C Charging Port
- AUX IN Port
- Left Channel Speaker
- Right Channel Speaker
- VH-D007M Bike Mount
- Type-C Charging Cable
- 3.5mm AUX IN Cable
Specifications
Bluetooth Version: 5.0
Bluetooth Receiving Range: 10M
Product Size: 1978360mm
Battery Capacity: 7.4V/2500mAh
Input: 5V/2A Speaker
Power: 2’8W
Bluetooth
Pair: The device name Twinkle will be displayed when it is searched and
connected for the first time. After the speaker is turned on, it will
automatically search for the last connected device. When the Bluetooth is
connected, you will be prompted. Or it will enter pairing mode when the last
connected device is not found in 10 seconds. The blue LED light flashes
quickly in the disconnected state, and the speaker will automatically turn off
when the Bluetooth is not connected for 10 minutes;
Note: After hearing the connection prompt, you can press the TWS button for
the TWS function.
Reconnect: when the connection distance is exceeded, the speaker will
reconnect automatically when back in the connection distance within 10 mins,
and automatically turn off after 10 minutes.
Disconnect: when connected, long-press the Bluetooth button to clear the
paired Bluetooth, you will be prompted with “disconnected”, then the speaker
will start to research devices.
Button
Power ON/OFF Button: Long press to turn on the speaker and you will hear
the prompt to enter Bluetooth pairing state. When playing music, press the
power button to pause/play the music. When incoming calls, press the button to
answer the call; press again to hang up. Double-press the power button to call
back the last call.
“+”: Press volume’+” button to turn up the volume, long press to switch to the
next track. “-“: Press volume “-” button to turn down the volume, long press
to switch to the next track.
Bluetooth Button: when connected, long-press the Bluetooth button to
clear the paired Bluetooth and re-enter the pairing state after hearing the
prompt; Press the Bluetooth button for the current battery notice.
Light Mode Button: Press the light button to switch to the light mode.
The following light modes will be played in order according to how many times
you press the light button: rainbow horse racing light I cross horse racing
light / colorful flashing light / colorful horse racing light; To turn off the
lighting effect, long-press the light mode button.
TWS: After the Bluetooth is connected, press the TWS button to turn on
the TWS interconnection function to connect with the same other product. When
two identical Bluetooth products are interconnected, stereo music will be
played at the same time, one is L channel, the other is R channel;
Note: The other speaker that is to be connected with TWS can only be
paired when its Bluetooth is not connected.
AUX: Connect the speaker with a 3.5mm AUX-IN cable, the mode will be
automatically switched to AUX. You can only adjust the volume and turn the
speaker on/off under AUX mode.
Charging
Support Type-C 5V/1A charging, the charging time is 2.5H, the red light in the charging state is long on, and the red light is off when it is fully charged. You will be prompted when the battery is low to 20%, please charge your speaker when you hear the low battery prompt.
LED Indicating Light
Flashing Blue Light: Pairing
Long on Red Light: Charging
Lights off: power off / fully charged/standby mode
Bike Mount
- Align the VH-D007M bike mount with the screw hole on the bottom of the speaker.
- Tighten the first nut of the VH-D007M bike mounts clockwise to lock the speaker as shown in the picture.
- Tighten the second nut of the VH-D007M bike mount clockwise as shown in the picture, and successfully install the VH-D007M bike mount on the bicycle bar.
- Installation complete.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
What’s in the Box:
- Speaker
- Type-C Charging Cable
- 3.5mm AUX IN Cable
- VH-D007M Bike Mount
- User’s Manual