RockTek RC-G2 Bluetooth Voice Remote User Manual
- June 6, 2024
- ROCKTEK
Table of Contents
RockTek RC-G2 Bluetooth Voice Remote
Buttons
| Button | What it’s for |
|---|---|
| Power | Turn your connected devices on or off and wake up or sleep your |
Chromecast.
Input| Turn on your connected device and switch it to active input.
OR Switch the input source on your connected device.
Number(0~9)| Enter a number
Subtitles| Display subtitles
Information| Display information
Red, Green, Yellow, Blue| Move to the service corresponding to the color
displayed on the screen
Google Assistant| Talk to Google. Press and hold the Google Assistant button
while you ask a question or say a command.
Bookmark| Allow you to easily access your favorite channels
Setting| Set the functions of your host.
Directional pad (D-pad)| Use the D-pad ring to navigate up, down, left or
right.
To select, press the middle button.
Back| Go back one screen.
TV(Guide)| To guide TV
Home| Return to the Home screen.
Volume| Press the top or bottom of this button to adjust the volume.
Program| Press the top or bottom of this button to change the program.
Mute| Mute the volume on your Chromecast or connected device.
YouTube| Launch installed YouTube apps, including YouTube, YouTube TV, YouTube
Kids or YouTube Music.
Note: You can remap the YouTube button to open your preferred YouTube app. Press and hold the button until your YouTube apps
appear on your TV screen, then select the app you want.
Netflix| Launch Netflix.
Pairing
Before using the Bluetooth Google Reference remote, you need to pair to your Host by pressing pairing keys.
Microphone
This is the mic you’ll use to talk to Google. To learn more about Google
Assistant, ask “What can you do?”
Tip: Use the voice remote to control the TV, search, and more.
Example queries:
- “What should I watch?”
- “Find funny movies.”
- “Show me sci-fi adventure TV shows.”
LED
The LED tells you the current status of your remote.
Software updates to your Reference Voice Remote
When software updates are released for your Voice Remote, they will be applied automatically as long as it’s paired to your Host.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>